Wind_Eagle's blog

By Wind_Eagle, history, 23 months ago, translation, In English

38-20230104210158

Hello, Codeforces!

I am very glad to invite you to the Codeforces Round #843 (Div. 2), which will take place in Jan/10/2023 14:15 (Moscow time). This round will be rated for the participants with rating lower than 2100.

My sincere thanks to:

You will have 2 hours and 30 minutes for solving 6 tasks, one of which will be divided into easy and hard verions. The round is based on the problems from the first day of Belarusian Regional olympiad. We kindly ask all Belarusian pupils who participated in this olympiad, to refrain from taking part in this round and discussing the problems publicly before the round ends.

I hope you will enjoy the round!

Round testers (not complete list): MathBoy, FairyWinx, nnv-nick, K1ppy, olya.masaeva, Septimelon, PavelKorchagin, 4qqqq, kova1.

Score distribution: (500+1000)-1000-1500-2000-2000-2500.

UPD. Score distribution was changed: (500+500)-1000-1500-2000-2250-3000.

UPD2: Congratulations to the winners!

Победители

Vote for your favourite task!

Task А: Gardener and the Capybaras

Task B: Gardener and the Array

Task C: Interesting Sequence

Task D: Friendly Spiders

Task E: The Human Equation

Task F: Laboratory on Pluto

UPD3: Finally, here is the editorial: press here

  • Vote: I like it
  • +309
  • Vote: I do not like it

| Write comment?
»
23 months ago, # |
  Vote: I like it +158 Vote: I do not like it

omg subtasks for A round

»
23 months ago, # |
Rev. 3   Vote: I like it +20 Vote: I do not like it

I wish Belarusian students good luck on Belarusian Regional Olympiad.

I hope tasks will be interesting for you :)

»
23 months ago, # |
  Vote: I like it +15 Vote: I do not like it

Thanks for inviting


»
23 months ago, # |
  Vote: I like it -20 Vote: I do not like it

Please no more problems like edu 141B

  • »
    »
    23 months ago, # ^ |
      Vote: I like it +9 Vote: I do not like it

    Delete this they will surely give it then

  • »
    »
    23 months ago, # ^ |
      Vote: I like it -9 Vote: I do not like it

    That's was a good constructive problem. I like those problems because even newbie can solve it and i have seen even master are sometimes not able to solve them. Try till you get the right approach.(It's just how i see them haha).

»
23 months ago, # |
  Vote: I like it -33 Vote: I do not like it

could u post a blog about this server i recently got to know about this where mass copiying is happening https://discord.gg/6RskCNmG

»
23 months ago, # |
  Vote: I like it +5 Vote: I do not like it

As a tester, I'd like to say that problems are interesting imo and I recommend you to participate!

»
23 months ago, # |
  Vote: I like it +2 Vote: I do not like it

hope this time problem statement is clear :/

»
23 months ago, # |
  Vote: I like it +9 Vote: I do not like it

First time see a problem A with hard version

»
23 months ago, # |
  Vote: I like it +7 Vote: I do not like it

Omg! Yellow round.

»
23 months ago, # |
  Vote: I like it 0 Vote: I do not like it

So it seems like from the score distribution, the whole problem A has the same difficulty as B right?

»
23 months ago, # |
  Vote: I like it -24 Vote: I do not like it

Dont include Mathematical Problems please.

»
23 months ago, # |
  Vote: I like it +5 Vote: I do not like it

Will this contest be as beauty-full as the last one.XD.

»
23 months ago, # |
  Vote: I like it 0 Vote: I do not like it

Finally a contest with friendly time to Chinese coders! Gl, hf!

  • »
    »
    23 months ago, # ^ |
      Vote: I like it +1 Vote: I do not like it

    Actually, 22:35(UTC+8) is not TOO unfriendly for who are used to staying up late. It's better called friendly time to Australian coders.

  • »
    »
    23 months ago, # ^ |
      Vote: I like it +3 Vote: I do not like it

    I remember that once there were two contests held at about 15:35(UTC+8) and 18:35(UTC+8) on the same day.

  • »
    »
    23 months ago, # ^ |
      Vote: I like it 0 Vote: I do not like it

    Of course it's a very friendly time.I can't stay up late because my father don't allow me to do that:)

»
23 months ago, # |
  Vote: I like it +9 Vote: I do not like it

Div2 A with subtasks? Sounds interesting,but I don't know if it will be a good problem.

»
23 months ago, # |
  Vote: I like it +8 Vote: I do not like it

OMG unusual starting time and subtasks for A!! Wish you positive delta!!

»
23 months ago, # |
  Vote: I like it +1 Vote: I do not like it

Finally, the opportunity presents itself. I will become a newbie again.

»
23 months ago, # |
  Vote: I like it -77 Vote: I do not like it

Hello can you upvote me to help me with my contribution.

  • »
    »
    23 months ago, # ^ |
      Vote: I like it +6 Vote: I do not like it

    No! I prefer Downvoting you.

    • »
      »
      »
      23 months ago, # ^ |
        Vote: I like it -14 Vote: I do not like it

      Ok as you like but i don't think i did something that i should be minused

      • »
        »
        »
        »
        23 months ago, # ^ |
          Vote: I like it +3 Vote: I do not like it

        You act like a girl while being a boy

  • »
    »
    23 months ago, # ^ |
      Vote: I like it +34 Vote: I do not like it

    I down voted you, to show world doesn't work that way. :)

»
23 months ago, # |
  Vote: I like it +3 Vote: I do not like it

Plan to take part in this contest. Hope $$$\Delta>0$$$ for me, and you too!

»
23 months ago, # |
  Vote: I like it +6 Vote: I do not like it

NOTE THE UNUSUAL TIME

»
23 months ago, # |
  Vote: I like it +12 Vote: I do not like it

wow

»
23 months ago, # |
  Vote: I like it +37 Vote: I do not like it

My GPA is crying out

»
23 months ago, # |
  Vote: I like it +3 Vote: I do not like it

8 pm is best time . We have classes at college .

»
23 months ago, # |
  Vote: I like it +3 Vote: I do not like it

Hope it will be a wonderful contest with fantastic problems!

»
23 months ago, # |
  Vote: I like it +8 Vote: I do not like it

As a Chinese,I usually have to stay up late for the cf round, but today I can go to bed earlier, so enjoy it and have fun!

»
23 months ago, # |
  Vote: I like it +7 Vote: I do not like it

I suggest to do more A , B subtasks in the future

  • »
    »
    23 months ago, # ^ |
      Vote: I like it 0 Vote: I do not like it

    True Mate.

  • »
    »
    23 months ago, # ^ |
      Vote: I like it -7 Vote: I do not like it

    After this contest, I have to disagree.

    Problem A2 is scaring me. I wouldn't have participated if I cared about my rating.

»
23 months ago, # |
  Vote: I like it +11 Vote: I do not like it

orz 244mhq

»
23 months ago, # |
  Vote: I like it +35 Vote: I do not like it

Why Delay 10 min Sir ??

»
23 months ago, # |
  Vote: I like it 0 Vote: I do not like it

 

»
23 months ago, # |
  Vote: I like it +5 Vote: I do not like it

Contest start time changed?

  • »
    »
    23 months ago, # ^ |
      Vote: I like it +3 Vote: I do not like it

    10 minutes postponed!

  • »
    »
    23 months ago, # ^ |
      Vote: I like it 0 Vote: I do not like it

    Yes, postponed by 10 mins. Good luck!

  • »
    »
    23 months ago, # ^ |
      Vote: I like it +36 Vote: I do not like it

    Thanks! I thought my country decreased its standard time by 10 minutes

»
23 months ago, # |
  Vote: I like it +3 Vote: I do not like it

10 min. delay!

»
23 months ago, # |
  Vote: I like it 0 Vote: I do not like it

DelayForces

»
23 months ago, # |
  Vote: I like it 0 Vote: I do not like it

Now it's delay-master-forces.

»
23 months ago, # |
  Vote: I like it +5 Vote: I do not like it

Will there be second delay if the rating update of last contest still uncompleted?

»
23 months ago, # |
  Vote: I like it +11 Vote: I do not like it

I love this world.

»
23 months ago, # |
  Vote: I like it +1 Vote: I do not like it

Love this contest! As I expected from CF Round #741's author.

»
23 months ago, # |
  Vote: I like it +14 Vote: I do not like it

F is 100491E - Expedition to Mars on higher constraints but it's possible to adjust the intended solution to 4e5.

  • »
    »
    23 months ago, # ^ |
    Rev. 2   Vote: I like it 0 Vote: I do not like it

    Actually, I agree with you it's just a matter of time to solve this version if you have a solution for that gym problem and 144 participants solved that problem already I guess so it's easy for them.

    • »
      »
      »
      23 months ago, # ^ |
        Vote: I like it +5 Vote: I do not like it

      Tbf $$$n$$$ up to $$$500$$$ allows a lot more different approaches. When my team and I were solving that gym contest, we went for a solution that isn't really viable for $$$4 \cdot 10^5$$$. Well, at least I failed to fix it :(

»
23 months ago, # |
Rev. 3   Vote: I like it -13 Vote: I do not like it

The most balanced contest

»
23 months ago, # |
  Vote: I like it +76 Vote: I do not like it

I kinda feel bad for spiders with one leg(

  • »
    »
    23 months ago, # ^ |
      Vote: I like it +86 Vote: I do not like it

    You are not worried about $$$3\cdot10^5$$$-legged spiders, right?

»
23 months ago, # |
  Vote: I like it 0 Vote: I do not like it

For C when i run the code in my system it was giving correct output for testcase 1 , but its giving wrong output when run on codeforces for testcase 1 . Any Idea why so ? https://codeforces.me/contest/1775/submission/188754539

»
23 months ago, # |
  Vote: I like it 0 Vote: I do not like it

Nice problemset..

How to solve C?

  • »
    »
    23 months ago, # ^ |
    Rev. 2   Vote: I like it +9 Vote: I do not like it
    • If $$$x = n$$$, the answer is trivially $$$n$$$ itself.

    • If $$$x = 0$$$, this means that the most significant bit of $$$n$$$ must become 0 at some point. If this is the $$$a$$$-th bit from the right, then the first number to flip this bit is $$$2^a$$$ (single 1 followed by $$$a$$$ 0s). So the AND must include $$$2^a$$$ and we can see that $$$x$$$ AND $$$2^a$$$ is 0, so the answer is $$$2^a$$$.

    • Now $$$x$$$ must have at least one $$$1$$$. Find the last $$$1$$$ in $$$x$$$, and let's say it's at position $$$\ell$$$. Because bit $$$\ell$$$ is a 1, this means it was never flipped while incrementing the numbers, suggesting that all bits to the left of bit $$$\ell$$$ remain unchanged. So the prefix of $$$x$$$ up to bit $$$\ell$$$ must be equal to the prefix of $$$n$$$ up to bit $$$\ell$$$. If there is a mismatch, the answer is $$$-1$$$.

    • We can now write $$$x$$$ as some $$$prefix$$$ (which ends with a 1) followed by all 0s, and $$$n$$$ as the same $$$prefix$$$ followed by some $$$suffix$$$ (whose length matches the block of 0s at the end of $$$x$$$). There are two further cases to consider:

    1. If the $$$suffix$$$ begins with a 1, then we have a problem. Since this bit is 0 in $$$x$$$, it must be flipped at some point. But flipping this 1 will also flip the 1 to its left, i.e., the last bit of the $$$prefix$$$. But we know that the $$$prefix$$$ cannot change, so this scenario cannot happen, i.e., answer is $$$-1$$$.

    2. Otherwise, find the first 1 in the $$$suffix$$$. Let's say it's in position $$$c$$$ (from the right). This bit is 0 in $$$x$$$, so it must be flipped at some point. When this bit is first flipped, the bit at its immediate left (position $$$c + 1$$$) becomes 1, and everything after it becomes 0. This number is $$$x + 2^{c + 1}$$$, i.e., the common $$$prefix$$$ followed by all 0s except a 1 in position $$$c + 1$$$. Conveniently, applying AND between this number and $$$n$$$ will already yield $$$x$$$ (the only $$$1$$$ after the prefix is at position $$$c + 1$$$, which is a 0 in $$$n$$$), so this number is the answer.

    My submission: 188732906. I converted the numbers to binary first, and worked from there, converting back when printing the answer (except when the answer was $$$n$$$ or $$$x$$$ itself).

    • »
      »
      »
      23 months ago, # ^ |
        Vote: I like it +22 Vote: I do not like it

      "I converted the numbers to binary first, and worked from there, converting back when printing the answer."

      Conveniently for me, my computer stores numbers as binary internally so I never need to convert back and forth.

      • »
        »
        »
        »
        23 months ago, # ^ |
          Vote: I like it 0 Vote: I do not like it

        lol, yeah, I know I can use bit shifts to process them faster, but binary strings are more readable imo. I don't have enough experience with bit shifting to be confident that I can code the correct solution with lower thinking + typing time.

  • »
    »
    23 months ago, # ^ |
      Vote: I like it 0 Vote: I do not like it

    Answer will always lie between n and INT64MAX and bitwise and from n to k >= bitwise and from n to k+1 therefore you can apply binary search . To find bitwise and from n to k you can search on net and get method easily .

»
23 months ago, # |
  Vote: I like it +1 Vote: I do not like it

"Time limit exceeded on pretest 12"

  • »
    »
    23 months ago, # ^ |
      Vote: I like it +3 Vote: I do not like it

    no need to look at one prime number more than once during bfs (this helped me with test 12)

»
23 months ago, # |
Rev. 2   Vote: I like it +4 Vote: I do not like it

I hate A so much that I mistook subarray for subsequence in B.

OMG I didn't read this in problem A

Spoiler

Problem A-D is interesting.

»
23 months ago, # |
  Vote: I like it +21 Vote: I do not like it

How to solve F?

  • »
    »
    23 months ago, # ^ |
      Vote: I like it 0 Vote: I do not like it

    I suspect giant casework.

    • »
      »
      »
      23 months ago, # ^ |
      Rev. 2   Vote: I like it +26 Vote: I do not like it

      Actually, no. The short idea is that all the possible answers are just rectangles with their angles cut somehow. You need to make a DP on how you cut the angles and iterate over the possible rectangles.

      For example, if $$$n=7$$$, then the optimal perimeter is $$$12$$$, and you need to try out the rectangles $$$3\times3$$$, $$$4\times2$$$ and $$$2\times4$$$ and cut their four angles somehow. A cut of an angle is just removing a stair-like figure, so it's calculated with DP.

      • »
        »
        »
        »
        23 months ago, # ^ |
        Rev. 2   Vote: I like it 0 Vote: I do not like it

        Ah got it, problem seems interesting now!

      • »
        »
        »
        »
        23 months ago, # ^ |
          Vote: I like it +11 Vote: I do not like it

        The idea is actually obvious, can you tell how to calculate the DP?

        • »
          »
          »
          »
          »
          23 months ago, # ^ |
            Vote: I like it +24 Vote: I do not like it

          You may precalculate $$$dp_{n,k}$$$, that is the number of stairs from $$$n$$$ blocks which are $$$k$$$-block tall. This DP can be computed in $$$O(n^2)$$$, but, since the number of blocks to be cut from angles is no more than $$$O(\sqrt n)$$$ in total, it's OK.

          Then, you just need to write another DP which decides on how much blocks to cut from each angle. It's $$$d_{i,j}$$$ where we have decided about the first $$$i$$$ angles and have already cut $$$j$$$ blocks.

          Note that all these DPs can be calculated in the beginning and used to answer all of the testcases.

          • »
            »
            »
            »
            »
            »
            23 months ago, # ^ |
              Vote: I like it +11 Vote: I do not like it

            Got it, thanks!

          • »
            »
            »
            »
            »
            »
            23 months ago, # ^ |
              Vote: I like it +3 Vote: I do not like it

            But how do you check that the stairs in different angles do not intersect while calculating $$$d_{i, j}$$$?

            • »
              »
              »
              »
              »
              »
              »
              23 months ago, # ^ |
                Vote: I like it +13 Vote: I do not like it

              You don't have to check it.

              If they are going to intersect, then the perimeter is just not optimal.

              • »
                »
                »
                »
                »
                »
                »
                »
                23 months ago, # ^ |
                  Vote: I like it +5 Vote: I do not like it

                Oh yeah, fair enough. It was the only part I was struggling with and this observation is so easy (( Thanks a lot!!

            • »
              »
              »
              »
              »
              »
              »
              23 months ago, # ^ |
                Vote: I like it 0 Vote: I do not like it

              They will not intersect. Because if it is possible, you can decrease the perimeter of your figure.

»
23 months ago, # |
  Vote: I like it +1 Vote: I do not like it

Any idea of B? I've tried many times but always got TLE

  • »
    »
    23 months ago, # ^ |
      Vote: I like it 0 Vote: I do not like it

    Also please update the rating of last educational round quickly

    • »
      »
      »
      23 months ago, # ^ |
      Rev. 2   Vote: I like it +3 Vote: I do not like it

      What I have done, is to count the no of occurrence of a bit throughout the whole array. Then for each element in the array if any bit which is set for this element is also set for any other element, Then the ans is always yes otherwise no

      Let me explain the reason with an example ,consider a no whose bit 2 and 4 is set. Another no whose bit 2,1 and 3 is set and another no whose bit 4, 5 and 7 is set. Since For First No, every bit that is set for this, also set for either b and c, so we can always take Or of every no in the array and Or of every No except that No(First one in this case). In Other words f(a) = Second No | Third No, f(b) = First No | Second No | Third No. Hence Ans is always possible.

      Here is my submission 188728251

  • »
    »
    23 months ago, # ^ |
      Vote: I like it 0 Vote: I do not like it

    If bits set in one number is a subset of another number , then the answer is always possible.

    • »
      »
      »
      23 months ago, # ^ |
      Rev. 5   Vote: I like it 0 Vote: I do not like it

      what about 4 number {1,2} , {4,3} , {1,3} , {2,4}

      • »
        »
        »
        »
        23 months ago, # ^ |
          Vote: I like it 0 Vote: I do not like it

        Yes in that case also the answer is possible.

        We need to check for every number if the occurrence of all the bits in this number is > 1. If it is satisfied, then the answer is Yes.

  • »
    »
    23 months ago, # ^ |
      Vote: I like it 0 Vote: I do not like it

    Did you by any chance used a fixed-size frequency array? freq[200001] * n <= 10e5 = TLE... I should know from having fallen for it 5 times this contest.

  • »
    »
    23 months ago, # ^ |
      Vote: I like it 0 Vote: I do not like it

    I've thought Double linked-list and priority-queue could solve E, but got WA.

  • »
    »
    23 months ago, # ^ |
      Vote: I like it 0 Vote: I do not like it

    when I used vector to store the frequencies I got the TLE, but then changed to unordered_map it passed. not sure why vector[i] is slower than map[i] :(

    • »
      »
      »
      23 months ago, # ^ |
        Vote: I like it +1 Vote: I do not like it

      I used int[200001] and got TLE 5 times because I forgot n <= 10e5 so I was doing 200000 operations per test case just setting up a frequency array.

  • »
    »
    23 months ago, # ^ |
      Vote: I like it 0 Vote: I do not like it

    Hint: the first subsequence is the whole array, the second is the whole array except only one number.

    • »
      »
      »
      23 months ago, # ^ |
      Rev. 2   Vote: I like it 0 Vote: I do not like it

      I've noticed that but my approach got TLE

      It seems that we need to store frequencies by map instead of array

      • »
        »
        »
        »
        23 months ago, # ^ |
          Vote: I like it 0 Vote: I do not like it

        You can use array, but it should be global. Furthermore, you should only set the elements you touch to 0, not the full array.

»
23 months ago, # |
  Vote: I like it +13 Vote: I do not like it

How to solve E?

  • »
    »
    23 months ago, # ^ |
    Rev. 2   Vote: I like it +24 Vote: I do not like it

    Let $$$s_1$$$ be the maximum sum over all subarrays and $$$s_2$$$ be the minimum sum over all subarrays, then the answer is $$$\max(s_1,-s_2)$$$.

    Lower bound

    Clearly you can change the sum of some subarray by at most 1 per operation, so the answer can't be lower than $$$\max(s_1,-s_2)$$$.

    Upper bound

    For simplicity we suppose $$$s_1>-s_2$$$.

    Consider the following rules:

    1. Adjacent positive elements are automatically merged into their sum. (The same for negative elements)

    2. Zeros are automatically removed from the array.

    It can be shown the answer won't change if we apply the rules.

    After merging, we can repeatly try to change every element closer to 0 and apply the rules after each operation. It can be shown it's optimal. The sum of the greatest subarray will always reduce by 1 after each operation. (If we can't at some moment, then it's not the greatest subarray.)

    If the answer is greater than $$$s_1$$$, then there exists a subarray with sum greater than $$$s_1$$$, which is a contradiction.

    • »
      »
      »
      23 months ago, # ^ |
        Vote: I like it +13 Vote: I do not like it

      currently, your comment helps pretty much noone except those who just who want to see a AC and be done with the problem.

      What was the idea? how did you come up with it?

      Errorgorn's solution makes much mose sense in that regards

      • »
        »
        »
        »
        23 months ago, # ^ |
          Vote: I like it 0 Vote: I do not like it

        The intuition is that after each operation, the total sum of the elements changes by $$$-1, 0$$$, or $$$+1$$$. So if the current sum is $$$s$$$, then the answer is at least $$$abs(s)$$$.

        The second thing to note here is that the answer for the whole array is at least the answer for some consecutive subarrays. So the answer is at least the maximum of the absolute value over all subarray sums.

        Seems like this is achievable. But I currently don't have a proof for this. I have solved it using the same approach that errogorn used in the next comment.

      • »
        »
        »
        »
        23 months ago, # ^ |
          Vote: I like it +13 Vote: I do not like it

        Sorry, it's my bad. I've added some details.

  • »
    »
    23 months ago, # ^ |
    Rev. 2   Vote: I like it +21 Vote: I do not like it

    We will process elements left to right. When processing some element, we either create new operation or extend some old operation.

    Intuitively, it makes sense that we would not have to using operations to both add and subtract from an element. So a simple $$$O(n)$$$ greedy works.

    code
    • »
      »
      »
      23 months ago, # ^ |
        Vote: I like it 0 Vote: I do not like it

      Thank you very much!

    • »
      »
      »
      23 months ago, # ^ |
        Vote: I like it +8 Vote: I do not like it

      Is there any formal proof? (or an outline of a formal one)

      • »
        »
        »
        »
        23 months ago, # ^ |
          Vote: I like it +19 Vote: I do not like it
        Yes
  • »
    »
    23 months ago, # ^ |
      Vote: I like it +24 Vote: I do not like it

    Think about a sequence of prefix sums and observer how such operation affects this sequence of prefix sums.

    If you analyze carefully enough, then you'll see that one of the operations just adds $$$1$$$ to any subsequence of prefix sums, and the other operations just subtracts $$$1$$$ from any subsequence of prefix sums.

    So, AFAIK you just need $$$\max(0, \max(p_i)) + \max(0, \max(-p_i))$$$ where $$$p_i$$$ is the array of prefix sums.

»
23 months ago, # |
  Vote: I like it +5 Vote: I do not like it

I take back my words, it was a nice round.

»
23 months ago, # |
  Vote: I like it +42 Vote: I do not like it

F: Why did you set two types of questions as one problem? The difficulty levels of the two questions are different, so I think they should be set as separate problems.

A problem of calculating the number of ways was very interesting!!

  • »
    »
    23 months ago, # ^ |
      Vote: I like it 0 Vote: I do not like it

    I think subtask 1 is as easy as problem A...

  • »
    »
    23 months ago, # ^ |
      Vote: I like it +10 Vote: I do not like it

    You are right probably, it should be split.

    By the way, the original contest is OI-style, so there two problems were combined as one, with different groups for each of the subproblems. For Codeforces, the problem was just retained as-is.

»
23 months ago, # |
  Vote: I like it +3 Vote: I do not like it

can we use binary search for Problem C? since & is decreasing function, bitwise and of all number from n to m will be higher than x initially. We need to find first position where bitwise and of all number from n to m is x

»
23 months ago, # |
  Vote: I like it +16 Vote: I do not like it

Problem E almost = This Problem

  • »
    »
    23 months ago, # ^ |
      Vote: I like it +22 Vote: I do not like it

    Yes, you are right, sorry for that :(

    It's interesting that the round with the similar problem is also of Belarusian origin, but the authors came up with the idea independently AFAIK, so it's an unfortunate coincidence.

»
23 months ago, # |
  Vote: I like it -6 Vote: I do not like it

Very nice contest! Congrats to the authors!

»
23 months ago, # |
  Vote: I like it +7 Vote: I do not like it

lol, img when i got wrong ans on test 15 problem D and it was only 5 minutes left

»
23 months ago, # |
  Vote: I like it +5 Vote: I do not like it

bruh I feel like a total loser, but at least I'm trying and participating lol

»
23 months ago, # |
  Vote: I like it +38 Vote: I do not like it

In problem B, I read "exclusive or" instead of "bitwise or" and was thinking how to find out if the set of sparse binary vectors is linearly independent and why it is Div2.B

»
23 months ago, # |
  Vote: I like it +43 Vote: I do not like it

String consists of letters 'a' and 'b' only :) could have written it in black :)))

  • »
    »
    23 months ago, # ^ |
      Vote: I like it +3 Vote: I do not like it
    Whining
  • »
    »
    23 months ago, # ^ |
      Vote: I like it 0 Vote: I do not like it

    Well, I just knew about it know.....

»
23 months ago, # |
  Vote: I like it -14 Vote: I do not like it

I think B problem cannot be solved by people who use JAVA because my O (n * k) solution is getting TLE even after using the fastest I/O operations. Link to my Submission :- https://codeforces.me/contest/1775/submission/188733443

  • »
    »
    23 months ago, # ^ |
      Vote: I like it +8 Vote: I do not like it

    Fixed-size frequency array is unsafe, n <= 10e5 so setting up a frequency array for each test case will instantly TLE you. USe map/hashmap because k constraint is guaranteed to be <= 10e5

    • »
      »
      »
      23 months ago, # ^ |
      Rev. 3   Vote: I like it 0 Vote: I do not like it

      You are saying that as t <= 10^5, so the freq array of size 2 * 10^5 (max p) will be iniatialized for each t which will give TLE and everytime initializing a fixed length array is not good beacuse there may be a case when max p is very small but still I am iterating till 2 * 10^5 every time which is unnecessary and the reason for TLE. But HashMap will not give TLE beacuse when we initialize a HashMap its initial size is very small due to which it will not give TLE. Right?

»
23 months ago, # |
  Vote: I like it 0 Vote: I do not like it

if i solved a problem correctly in contest and later during contest , by mistake i submit wrong code for that problem then is question points are added or not to my points

»
23 months ago, # |
  Vote: I like it 0 Vote: I do not like it

how to solve problem b??

  • »
    »
    23 months ago, # ^ |
      Vote: I like it 0 Vote: I do not like it
    hint1
    hint2
»
23 months ago, # |
  Vote: I like it 0 Vote: I do not like it

In task A, either the string b is lexicographically not smaller than the strings a and c at the same time, or the string b is lexicographically not greater than the strings a and c at the same time. @authors kindly look into the language

»
23 months ago, # |
  Vote: I like it +62 Vote: I do not like it
»
23 months ago, # |
  Vote: I like it +4 Vote: I do not like it

didn't read "The string consists of English letters 'a' and 'b' only." this part in A, So I solved it for every character and I had to use Z function for prefix comparison XD

»
23 months ago, # |
Rev. 3   Vote: I like it +32 Vote: I do not like it

Accepted in last 4th sec.

Screenshot-20230110-191726

»
23 months ago, # |
  Vote: I like it 0 Vote: I do not like it

Can't understand why for B:

1
2
3 8 2 2
3 8 3 3

answer is YES?

  • »
    »
    23 months ago, # ^ |
      Vote: I like it 0 Vote: I do not like it

    Next follow ki distinct integers pi,1,pi,2,…,pi,ki (1≤pi≤2⋅10e5)

  • »
    »
    23 months ago, # ^ |
      Vote: I like it 0 Vote: I do not like it

    Ki integers are guaranteed to be distinct

  • »
    »
    23 months ago, # ^ |
      Vote: I like it 0 Vote: I do not like it

    This input is not valid, since the set bits must be distinct. For example, in the line 3 8 2 2, the given set bits are 8, 2, and 2, which is not a valid input. In the line 3 8 3 3, the given set bits are 8, 3, and 3, which is also not a valid input.

    If you actually meant the following:

    1
    2
    2 8 2
    2 8 3
    

    then the answer is NO.

»
23 months ago, # |
  Vote: I like it +3 Vote: I do not like it

Nice problems. Hope to see more contests like this in the future

»
23 months ago, # |
  Vote: I like it 0 Vote: I do not like it

Will this round be rated for who has reached 2100+ from 2100- in the last educational round?

»
23 months ago, # |
  Vote: I like it +21 Vote: I do not like it

Overlooking "the characters are A or B" from A2 took me 1hr...

I can't proof my solution for A2 (but it's allowed to use A-Z) so please hack it: 188722831

  • »
    »
    23 months ago, # ^ |
    Rev. 2   Vote: I like it +23 Vote: I do not like it

    This is actually a correct solution, if I'm not mistaken. For an arbitrary alphabet, if answer exists, then there exists such answer that |b| = 1. You can now solve task by bruteforce in O(n).

  • »
    »
    23 months ago, # ^ |
      Vote: I like it -13 Vote: I do not like it

    I saw the A or B part, but didn't have a very good proof, so I solved it the most stupid way imaginable.

    • thought that the solution will have a border somewhere around the first/last occurrence of A or B
    • literally bruteforced every combination of first A/first B/last A/last B $$$\pm 1$$$
    • prayed for that there cannot be too many combinations where we needed to scan
    • got AC, still have no proof

    submission: 188710406

  • »
    »
    23 months ago, # ^ |
      Vote: I like it 0 Vote: I do not like it

    I also overlook the a or b term which waste my 1.5 hours. And if am not wrong, the sentence which told that specific a or b term in A2 is added later on the contest. I have solved this through an observation that excluding the first and last character, if there exists an a then if I take it as the second word then it remains the smaller or equal the other two word which are the left and right part of the taken second word. If excluding the first and last character, there not exists an a then it should be the occurrences b and if I take those consecutive b as the second word and the first and last character respectively as the first and last word then the second word remains bigger or equal than the first and last word. In such these way, under the constraints of the problem there always exists a valid answer.

    • »
      »
      »
      23 months ago, # ^ |
        Vote: I like it 0 Vote: I do not like it

      And if am not wrong, the sentence which told that specific a or b term in A2 is added later on the contest

      You are wrong and just try to justify yourself.

  • »
    »
    23 months ago, # ^ |
      Vote: I like it +10 Vote: I do not like it

    Intrestingly, this is the original problem that was given in the olympiad. It took me 1h40m to solve it, and when I saw codeforces standings, I was absolutely shocked by amount of people who solved it that quickly.

»
23 months ago, # |
  Vote: I like it +3 Vote: I do not like it

didn't notice the unusual timing :facepalm:

»
23 months ago, # |
  Vote: I like it 0 Vote: I do not like it

For C when i run the code in my system it was giving correct output for testcase 1 , but its giving wrong output when run on codeforces for testcase 1 . Any Idea why so ? https://codeforces.me/contest/1775/submission/188754539

  • »
    »
    23 months ago, # ^ |
      Vote: I like it 0 Vote: I do not like it

    In my system, your submission is giving wrong answer only for the last test case.

  • »
    »
    23 months ago, # ^ |
      Vote: I like it 0 Vote: I do not like it

    You're doing ll rem=(1ll<<i)-(i?pre[i-1]:0); inside a for loop where i can equal 0, meaning you're trying to do pre[-1] which points you to other memory. This is why the code doesn't work or works differently on different machines.

  • »
    »
    23 months ago, # ^ |
      Vote: I like it 0 Vote: I do not like it

    Maybe an overflow is happening. Change LONG_MAX to 1e18+1

    • »
      »
      »
      23 months ago, # ^ |
      Rev. 2   Vote: I like it 0 Vote: I do not like it

      And don't forget, that in the case of n and x being both zero, your pre will be 0 sized, which gives an error

    • »
      »
      »
      23 months ago, # ^ |
      Rev. 3   Vote: I like it 0 Vote: I do not like it

      Thanks Bro .I changed LONG_MAX to 1e18 and it worked . But any idea why so ?

      • »
        »
        »
        »
        23 months ago, # ^ |
          Vote: I like it 0 Vote: I do not like it

        It seems, that LONG_MAX doesn't work on cf. It returns 2147483647(int_max) on cf, and 9223372036854775807 on onlinegdb. This wasn't an overflow then

»
23 months ago, # |
  Vote: I like it 0 Vote: I do not like it

Best ever standing and solved problem C in Div. 2 the first time! But I didn't have any clue of problem B :(

  • »
    »
    23 months ago, # ^ |
    Rev. 3   Vote: I like it 0 Vote: I do not like it
    Hint
    Solution
    • »
      »
      »
      23 months ago, # ^ |
        Vote: I like it 0 Vote: I do not like it

      but how are we sure that if we cant remove any element such that or of remaining element is same then answer will not exist?

      • »
        »
        »
        »
        22 months ago, # ^ |
        Rev. 3   Vote: I like it 0 Vote: I do not like it

        If for every number there is a unique bit that only appears into that number than to make the difference in the sequence you need to not take this one. If all the numbers contains a bit that is unique in them you have only two options either take all of them or nothing. To make them different we take both as these are the only options but there OR is not same.

    • »
      »
      »
      23 months ago, # ^ |
        Vote: I like it 0 Vote: I do not like it

      It seems that we should check every number in array c, if there exists one i, every bit in c[i] appears 2 times in the whole input, then the answer is "YES", otherwise "NO".

  • »
    »
    23 months ago, # ^ |
      Vote: I like it 0 Vote: I do not like it

    poor English :( Obviously the maximum set is a1 or a2 or ... or an .So let p is this subsequence.

    To find q, the number of elements in q must be at least 2.In this case, without q the p has no elements left.

»
23 months ago, # |
Rev. 7   Vote: I like it 0 Vote: I do not like it

Some discussion for E:

The main purpose of operation is to decrease the value of sum(|ai|) (the sum of the absolute values of ai), to achieve this purpose, we need to subtract from positive numbers, and add to negative numbers.

So every time when we choose subsequence, we can assume we always choose it with alternative sign (which like {+a1, -a2, +a3, -a4...} or {-a1, +a2, -a3, +a4...}), because if not, we can remove 2 adjacent element with same sign, and the total change of sum(|ai|) remain the same.

Therefore, we can always choose the longest subsequence with alternative sign. We can regard some consecutive elements with same sime as one element, and regard zeros as not exist. So we can rewrite the initial array as some non-zero numbers with alternative sign, each element represents the sum of a maximal block with same sign.

So we can get the answer: In each step, we do min(|ai|) times of operation, and all |ai| will be decreased by that value, then we remove zeros from the array, and merge adjacent elements with the same sign. However, this naive approach will be O(n^2) and get TLE. How to optimize it? Notice that if we do min(|ai|) times of operation, some elements will become 0, and it's adjacent elements will be in the same "block with same sign" now. So we could store the initial array into a double linked-list, whose node is like (long:value, Node:prev, Node:next, boolean:valid) and put each node in a priority queue. Each time we poll out a valid node from the priority queue, we merge it with node.prev and node.next to get a new node, link it with node.prev.prev and node.next.next, add it to the priority queue, then mark node.prev and node.next as invalid. Then we could get an O(n*log(n)) solution. (Also do not forget check nullity)

Update: Now my submission:188766704 has got AC. Unfortunately, I've not implemented it properly during the contest. Sad!

»
23 months ago, # |
  Vote: I like it +9 Vote: I do not like it

Mmmmm

Right after the contest :D

»
23 months ago, # |
  Vote: I like it -15 Vote: I do not like it

Wonderful round with great problems, it seems they all have clean solutions, but require "cute" observations. A2 is harder than E for me though (failed system testing on A2).

»
23 months ago, # |
  Vote: I like it 0 Vote: I do not like it

To problem B: Why is this case no? 1 3 2 1 2 2 3 4 2 5 6

»
23 months ago, # |
  Vote: I like it +3 Vote: I do not like it

Ratings updated preliminarily. We will remove cheaters and update the ratings again soon!

  • »
    »
    23 months ago, # ^ |
    Rev. 2   Vote: I like it +5 Vote: I do not like it

    But the rating of last educational round has not updated yet! Please update it first! I should have been div1 in this contest......

    • »
      »
      »
      23 months ago, # ^ |
        Vote: I like it +5 Vote: I do not like it

      Oh, sorry for that, our fault. Will fix soon.

    • »
      »
      »
      23 months ago, # ^ |
        Vote: I like it 0 Vote: I do not like it

      I might be wrong, but I think whether the contest is rated for you or not depends on which rating you had at the time of registration. Even if the rating for the edu round was updated before this contest but after registration, this contest would still have counted for you.

      In fact, this is why some users deliberately register for as many contests as they're able to when they're close to the border, so that they're all counted even if they cross the border sometime in the middle, e.g., earning Div2 rating boosts even after reaching Div1.

      So regardless of when the ratings are updated, it should not change the fact that this round will be rated for you. In the future, please consider your rating at the time of registration before you decide to register for a contest, since rating changes that were not yet applied would not be considered for the contest you're registering for.

      • »
        »
        »
        »
        23 months ago, # ^ |
          Vote: I like it +3 Vote: I do not like it

        Huh, thank God I took this div2 seriously :) Otherwise my M would have lasted less than 24 hours.

»
23 months ago, # |
  Vote: I like it +7 Vote: I do not like it

Problem D was nice.

»
23 months ago, # |
Rev. 2   Vote: I like it 0 Vote: I do not like it

I liked the problems themselves, but I have two minor issues with the presentation:

  • For Problem B, the input format was rather unusual, so I think it would have helped immensely if there was an example of a line in the given input format with an indication of what number it represents (preferably in both binary and decimal). As it is, I think the problem looks rather intimidating, despite actually being very simple, especially since participants do not even need to be aware of how to code bit operations to solve this.

  • For Problem C, specifying that the answer is guaranteed to be bounded below $$$5 \cdot 10^{18}$$$ is rather misleading, and notably suggests that a standard 64-bit signed integer type (like long long in C++) is insufficient. However, the actual upper bound is much lower (I think it's $$$2^{60}$$$), so 64-bit signed integer type would actually have been fine. But having the constraints specify $$$5 \cdot 10^{18}$$$ can scare away participants who memorized the upper bound for 64-bit signed integers before they could figure out that the upper bound was highly overestimated or that an unsigned 64-bit type would have worked regardless.

These are minor issues, but I think they serve as obstacles for less-experienced programmers who might otherwise have been able to solve these problems more smoothly, and I don't think early problems like B and C are good places to punish them for these kinds of little details.

  • »
    »
    23 months ago, # ^ |
      Vote: I like it +11 Vote: I do not like it

    The max value of signed int64 is 2^63-1=9.223*10^18, which is definitely larger than 5*10^18.

    • »
      »
      »
      23 months ago, # ^ |
      Rev. 2   Vote: I like it 0 Vote: I do not like it

      Oops, sorry, you're right. I was mistaken in thinking that was the unsigned upper bound. That being said, I don't think I'm alone in making such a mistake, so I do still think the overestimated upper bound can be intimidating for many, regardless.

      Most problems I see that involve long long calculations use an upper bound of $$$10^{18}$$$, or (more rarely) $$$2 \cdot 10^{18}$$$ if intermediate values are not expected to overflow. An upper bound of $$$5 \cdot 10^{18}$$$ is quite unusual, especially for a C problem.

»
23 months ago, # |
  Vote: I like it 0 Vote: I do not like it

How to solve C?

»
23 months ago, # |
  Vote: I like it 0 Vote: I do not like it

How to solve D? I tried to construct and graph using prime factors and then apply DFS but got WA.

  • »
    »
    23 months ago, # ^ |
      Vote: I like it 0 Vote: I do not like it

    DFS ? I think you mean BFS

  • »
    »
    23 months ago, # ^ |
      Vote: I like it 0 Vote: I do not like it

    Use BFS to get the shortest path. DFS is not for shortest paths.

  • »
    »
    23 months ago, # ^ |
      Vote: I like it 0 Vote: I do not like it

    I believe dfs (or DP) can be only used for Directed Acyclic graphs to find shortest path between nodes. anyone correct me if I'm wrong.

    • »
      »
      »
      23 months ago, # ^ |
        Vote: I like it 0 Vote: I do not like it

      Actually both are used to find the shortest path in DAG. First using DFS for finding the topological sort and then according to topological sort apply the dp.

»
23 months ago, # |
  Vote: I like it -8 Vote: I do not like it

Is the jiangly's answer corrent for this case of problem A?

1 abcbbc

»
23 months ago, # |
  Vote: I like it 0 Vote: I do not like it

I think this solution 188779455 works in O((log(n))^2) for problem C

  • »
    »
    23 months ago, # ^ |
      Vote: I like it 0 Vote: I do not like it

    Time Limit Exceeded on problem C

    • »
      »
      »
      23 months ago, # ^ |
      Rev. 3   Vote: I like it 0 Vote: I do not like it

      You should do ll msb_val = (1ll << msb_p1); instead of ll msb_val = (1 << msb_p1); in your andOperator function. Also you should initialise hi variable in your binary search to a much larger value(2e18 should work).

»
23 months ago, # |
  Vote: I like it 0 Vote: I do not like it

Hi, Why is this giving tle?...When i replaced vector cnt with map it got accepted Solution for B

  • »
    »
    23 months ago, # ^ |
      Vote: I like it 0 Vote: I do not like it

    this is a multi-testcases problem, every time you create vector cnt(2e5+1);
    10^5 * (2e5+1)

    • »
      »
      »
      23 months ago, # ^ |
      Rev. 2   Vote: I like it 0 Vote: I do not like it

      Holy fk!!! IT's so obvious.... THanks man I forgot that there is no upper bound on sum of n values over all testcases

»
23 months ago, # |
  Vote: I like it 0 Vote: I do not like it

C can be solved in $$$O(\log n)$$$ without binary search. Here is how.

Spoiler
  • »
    »
    23 months ago, # ^ |
      Vote: I like it +3 Vote: I do not like it

    It can be solved in $$$O(\log \log n)$$$. You just need to find the most significant bit that differs.

    • »
      »
      »
      23 months ago, # ^ |
      Rev. 2   Vote: I like it 0 Vote: I do not like it

      Wouldn't that still be $$$O(\log n)$$$ with a very small constant (or with minor improvements/pruning)? I don't remember __builtin_clz being $$$O(\log \log n)$$$.

      • »
        »
        »
        »
        23 months ago, # ^ |
          Vote: I like it 0 Vote: I do not like it

        I believe you meant binary search on numbers around 1e18. The point of my message was, that it can be solved asymptotically faster. Though it uses binary search on bits ($$$\log 60$$$).

»
23 months ago, # |
  Vote: I like it +5 Vote: I do not like it

One of the best round! Loved it!

»
23 months ago, # |
  Vote: I like it +5 Vote: I do not like it

Wind_Eagle Hello. Nice round with cool problems. I think the testers happened to miss out on big powers on B despite the pretests on B including big powers some solutions passed due to UB nature of C++.

My solution is pretty straightforward so I feel the testers were just unlucky not to find a possibility of such a FST.

That's my only bit of feedback. D is a nice implementation problem.

»
23 months ago, # |
  Vote: I like it 0 Vote: I do not like it

OMG. I misread B's statement thinking the problem is about XOR even after rereading a couple of times

»
23 months ago, # |
Rev. 2   Vote: I like it +14 Vote: I do not like it

In the first test case, the only possible way to split the line s into three lines is "b", "bb", "a".

I'd been wondering for over half an hour why the first test case has only one solution. I thought I misunderstood the problem and kept on re-reading the description in case I missed something. But then I realized that the statement had been secretly changed...

In the first test case, one of the possible ways to split the line s into three lines is "b", "bb", "a".

I believe it would be better if contestants receive notification after any problem statement change.

»
23 months ago, # |
  Vote: I like it 0 Vote: I do not like it

can anyone tell which test case i am missing here is the link of my code code

»
23 months ago, # |
Rev. 4   Vote: I like it +2 Vote: I do not like it

This was a great round involving interesting bits . No pun intended. I found them interesting and made editorial videos on these, you can check them at this channel- here

»
23 months ago, # |
Rev. 5   Vote: I like it +13 Vote: I do not like it

Still can't believe the implementation of a div2E problem could be as easy as "find the difference of the maximal prefix sum and the minimal" which could be implemented by anybody. What an excellent problem. I just implemented a complicated O(n*log(n)) algorithm and couldn't debug it before the contest ended.

Proof
  • »
    »
    23 months ago, # ^ |
      Vote: I like it +5 Vote: I do not like it

    Well, I read your proof 5 times but could not understand a single sentence ;-; Any simpler explanation? O-O

    • »
      »
      »
      23 months ago, # ^ |
        Vote: I like it +8 Vote: I do not like it

      Umm… It's better to waiting for official editorial…

    • »
      »
      »
      23 months ago, # ^ |
        Vote: I like it 0 Vote: I do not like it

      operation + — + — + — is just +1 on some intervals in prefix summ array ..... (+1 +1 +1) ..... (+1 +1 +1) .... (any set of intervals you want)

      operation — + — + — + is just -1 on some intervals in prefix summ array ..... (-1 -1 -1) ..... (-1 -1 -1) ....

      and you want to make array of prefix summ = [0, 0, 0, 0, 0, 0, 0, 0, 0]

    • »
      »
      »
      23 months ago, # ^ |
      Rev. 2   Vote: I like it 0 Vote: I do not like it

      and its not actually max — min its max(max — min, max, abs(min))

      for case with every pref summ > 0 or every pref summ < 0

»
23 months ago, # |
  Vote: I like it 0 Vote: I do not like it

A Great Round!

But I failed to become Master as I had promised. : (

»
23 months ago, # |
Rev. 5   Vote: I like it 0 Vote: I do not like it

I have question for problem B

What subsequences are proper for such arrays?

3 1 2 3
3 3 4 5
3 1 4 5

1 1 1 0 0     "2"
1 1 0 0 1     "3"
    1 1 1     "1"

I think it is impossible to find such sequences to obtain the same OR result. This is 7-th token for test 2.

https://codeforces.me/contest/1775/submission/188813071

»
23 months ago, # |
Rev. 2   Vote: I like it -14 Vote: I do not like it

Problem setter was bad. Still they do not add a dislike button for each problem. What a strategy! Shame on you!

Note: Downvotes accepted. Because I want to reveal their actual face!
  • »
    »
    23 months ago, # ^ |
      Vote: I like it 0 Vote: I do not like it

    Were the problems mathematical?

    Problem setter is apparently a big fan of observation problems : Have a Look

»
23 months ago, # |
Rev. 2   Vote: I like it 0 Vote: I do not like it

Ah it hurts man!
Its too hard to live with 1399 rating

»
23 months ago, # |
  Vote: I like it 0 Vote: I do not like it

Is the new test data for question D an attempt to get dijkstra stuck?

»
23 months ago, # |
  Vote: I like it 0 Vote: I do not like it

Hardest task A i've ever seen (div2)

»
23 months ago, # |
  Vote: I like it 0 Vote: I do not like it

For problem C, many have used this logic. Can someone explain this logic with proof, and with an example

for(ans=n;ans&&ans!=x;) ans&=n+=n&-n; ans==x?printf("%lld\n",n):printf("-1\n");

  • »
    »
    23 months ago, # ^ |
      Vote: I like it 0 Vote: I do not like it

    For integer x,if x&y ( y < lowbit(x) ). For example, x=101000B, y=100B, m=x&y, the last 3 digits of m have to be 0, it means that the last 3 digits of m won't change. To change the last 4th digit of m, x must be added an integer which is greater than 1000B, and then x=110000B,it can make the last 4th digit of result equal to 0.

»
23 months ago, # |
  Vote: I like it +19 Vote: I do not like it

Where's the solution or editorial?

Thanks!

  • »
    »
    23 months ago, # ^ |
      Vote: I like it 0 Vote: I do not like it

    It will be posted soon. We need to translate it from Russian.

    • »
      »
      »
      23 months ago, # ^ |
        Vote: I like it +3 Vote: I do not like it

      Russian analysis of the solution to the problems as well please put it out.

»
23 months ago, # |
Rev. 3   Vote: I like it +6 Vote: I do not like it

I got a delta of +77 in Educational Round 133 with initial rating of 1333 and rank of 3959.

But I only get a delda of +36 this time with initial rating of 1392 and rank of 2185.

I thought I might get a delta over +100, it's far from my expection :(, and I'm confused.

»
23 months ago, # |
Rev. 3   Vote: I like it +8 Vote: I do not like it

Problem F is about partition number, which need to prepare the partition number up to sqrt(n) (partition number of n is the number of unordered tuples of positive integers (a1, a2, ..., a_k) where sum of a_i is n), and calculate it's 4th convolution power (by doing self-convolution twice). Although the unknown mod number disabled FFT, we can calculate it directly since sqrt(n)<640 is small enough.

  • »
    »
    23 months ago, # ^ |
      Vote: I like it 0 Vote: I do not like it

    Why convolution gives correct result?

    • »
      »
      »
      22 months ago, # ^ |
        Vote: I like it 0 Vote: I do not like it

      Assume that the minimal rectangle contains the rectangle is a*b, we need to remove a*b-n=k blocks and remain the perimeter unchanged. First consider the situation which we only remove from the upper left corner. Let r1,r2,r3… is the number of blocks we'll remove from the 1st, 2nd, 3rd… row. We can observe if the perimeter is remained, r1 >= r2 >= r3… must hold. Thus number of ways to remove k blocks from one corner is p[k] where p is array of partition numbers. If we need to remove from all 4 corners, let for each corner we remove k1, k2, k3, k4 blocks, where 0<=k_i<=k, sum(k_i)=k, the total number of ways to remove k blocks is sum(product(p[k_i])), where {k_i} iterates over all 4-tuples which satisfies the former condition. That's the definition of convolution (the convolution of array a and b is conv(a,b)[n]=sum(a[i]b[n-i]), which is equivalent to sum(a[i]b[j]) where i+j=n).

      • »
        »
        »
        »
        22 months ago, # ^ |
          Vote: I like it 0 Vote: I do not like it

        Thank you. How we make sure that removed blocks don't intersect?

        • »
          »
          »
          »
          »
          22 months ago, # ^ |
          Rev. 2   Vote: I like it 0 Vote: I do not like it

          If the upper left corner intersect with the upper right corner, then the top row will be completely removed, which means the perimeter will be lower, so the initial perimeter is not optimal. Therefore, if the initial perimeter is optimal, the blocks removed in corner will not intersect.

»
22 months ago, # |
Rev. 2   Vote: I like it +11 Vote: I do not like it

While the problems A-E were nice, problem F blew my mind, huge props to authors! It is the best problem i have solved in 2023 so far. My friend and i spent around 2 school days on this one and we had a blast :).

»
22 months ago, # |
Rev. 2   Vote: I like it -15 Vote: I do not like it

Deleted.