Hello 2019 Editorial

6 лет назад, # ^ |

+41

We'll use the "standard" LIS algorithm with binary searching: sweep through the array, and maintain an array of dp[l] = min(A[i] s.t. there's an increasing sequence of length l ending at A[i]).

When we see a new value A[k], we binary search and find the maximum length l such that dp[l] < A[k]; then we know there's an increasing sequence of length l+1 ending at A[k]. Also, l is maximal, so dp[l+1] > A[k], so we should update dp[l+1] = A[k].

Now, note that the sequence over time of values of dp[l] is decreasing. Thus, these are precisely a partition of the permutation into |LIS| decreasing subsequences, so we can store a vector for each dp[l], and get the subsequences.

→ Ответить

6 лет назад, # ^ |

-6

But why is its running time $\text{[math]}$

→ Ответить

6 лет назад, # ^ |

The running time of the LIS algorithm is only $\text{[math]}$ , but we have to run it $\text{[math]}$ times because we're slowly removing one LIS at a time.

→ Ответить

6 лет назад, # ^ |

thanks

→ Ответить

mijanur

2 месяца назад, # ^ |

← Rev. 2 →

Why does removing the maximum of LIS or LDS each time give the wrong answer?

→ Ответить

dewa251202

6 лет назад, # |

+12

where does the Youtube tutorial go? :/

→ Ответить

amr0

6 лет назад, # |

+15

For 1097D why is the result multiplicative?

→ Ответить

Vladislao

6 лет назад, # ^ |

+44

If you calculate the expected value for a given n with k = 1 (one step), you see that the answer is simply σ₁(n) / σ₀(n), where σ₁(n) denotes the sum of divisors of n and σ₀(n) the number of divisors.

It's well known that σ₁ and σ₀ are multiplicative functions (and easy to prove indeed). So, it's easy to see from there using induction that the function is multiplicative.

→ Ответить

6 лет назад, # ^ |

← Rev. 2 →

I wasn't sure when I was in the contest, so I used DFS to search all the divisors of n, the complexity is correct.

→ Ответить

vivek_shah

6 лет назад, # ^ |

E[f(X)g(Y)] = E[f(X)]×E[g(Y)], if X and Y are independent. Here exponents of each prime divisor of N are independent of each other, and E(.) denotes the expectation value.

→ Ответить

ragaja_14

6 лет назад, # |

can anyone help me with problem B

→ Ответить

SurajPrakash

6 лет назад, # ^ |

← Rev. 2 →

Since the constrains are small, u can apply brute force, a simple approach is that for every given angle u can consider rotating it either clockwise(+) or anti-clockwise(-). Do it for all the angles in the array and keep summing them, if in one of the ways u get a final sum(after one complete traversal of array) which is divisible by 360, then output 'yes' other wise if non of the ways satisfy the condition sum%360==0 then output 'no'. There are total 2^15 ways(maximum) of obtaining the final sum. Refer to my solution for more clarity. https://codeforces.me/contest/1097/submission/47914337

→ Ответить

obliviousz

5 лет назад, # ^ |

Yes, we can approach all the possible combinations using bit masking

→ Ответить

sorabhjainnitj

6 лет назад, # |

How to calculate dp(k,j) in problem D.

→ Ответить

asfd221

6 лет назад, # ^ |

← Rev. 2 →

sum ( dp(k -1,j + i) * (1 / (j + i + 1)) ), i goes from 0 to (p -j). Not sure though

→ Ответить

https://codeforces.me/blog/entry/64310?#comment-482095

6 лет назад, # ^ |

→ Ответить

Teamforces

6 лет назад, # |

+16

In my opinion, posting fast such editorials without tutorials of some task is muuuch better

It gives time for problemsetter to write missing ones clearly and others an oportunity to read available parts and try to understand them

→ Ответить

mv_29

6 лет назад, # |

← Rev. 2 →

in problem c " The task is to connect some of them into ordered pairs so that each bracket sequence occurs in at most one pair and the concatenation of the bracket sequences in each pair is a correct bracket sequence". Can someone explain me the solution of c in context of the bold statement above.if we want each bracket sequence occur in at most one pair then how is the editorial solution is correct. for ex if sequences given are : "((,)),)())" then solution according to the editorial will be 1 but there will be one sequence left with no pair which violates the condition in the bold statement.Can someone clarify my doubt

→ Ответить

majk

6 лет назад, # ^ |

At most one means zero or one.

→ Ответить

blitzitout

6 лет назад, # |

For 1097B, how to solve it if N is bigger?

→ Ответить

6 лет назад, # ^ |

like this:47957456

it is O(nk) and can be O(nk / 32) if you use bitset

→ Ответить

tiktak2

4 года назад, # ^ |

← Rev. 3 →

I will be glad if you make me understand these according to editorial: shanxizeng Aman_98 blitzitout

i) why should I chose 2^n-1 instead of 2^n

ii) If i-th bit is 0 so we should do it clockwise rotation for i-th, why?

→ Ответить

blitzitout

4 года назад, # ^ |

In general, this is a technique for brute forcing and looking at all possible outcomes. Since, every angle has 2 options (either CW or ACW), we have at most $$$2^N$$$ possibilities. We can represent all possible outcomes in terms of binary representation of all numbers from $$$0$$$(all 0s) to $$$2^N-1$$$(all 1s). So, we can check a total of $$$2^N$$$ possibilities and see if we get the desired result.
Basically bit 0 represents one choice and bit 1 represents the leftover choice. There is no hard and fast rule, you can assign any direction to any bit. Either way it's fine.

→ Ответить

zephxr

4 года назад, # ^ |

shanxizeng Can you explain This Solution — 47957456 of yours for the problem 1097B - Petr and a Combination Lock.

I Have dried run it thoroughly but i am not able to understand the idea behind it.

→ Ответить

4 года назад, # ^ |

Firstly,you can define h[i][j] as something that if you can get a j after rotate i time.If it's true,the value is 1,or it's 0.And you can simply get that h[i][j]=h[i-1][(j-a[i])%360] or h[i-1][(j+a[i])%360].This is a simple DP.

And then,you can define g[j]=h[i][j],f[j]=h[i-1][j].The method of calculating is similar as below.When all of the g[j] were done,you can copy g to f,and use f to calculate h[i+1].At last,you can get h[n][0].

→ Ответить

Aman_98

6 лет назад, # ^ |

+10

47954506

→ Ответить

PinkRabbitAFO

6 лет назад, # |

-7

How to solve G?

I came up with an idea that we can calculate the number of ways to choose k edge(s) from n-1 total edges, and for each way we calculate the number of the set of vertices which satisfies the condition(for every edge we chosen, there is at least one vertex(in the set) in both sides of the edge).

And that is the answer. Maybe can use DP on tree to solve it.

Because f(S)^k <--> choose k edge(s), that's equivalent.

Am I right?

sry for my poor English, wish you can understand me...

→ Ответить

_rqy

6 лет назад, # ^ |

← Rev. 2 →

My idea is similar but not same with yours.

First we can use Stirling number to split power into several falling factorial，e.g

f(S)^k=sum{i=1...k}S(k,i)f(S)_(i)，where x_(i)=x(x-1)...(x-i+1)=C(x,i)i!

then we should compute sum C(f(S),i), for every 1<=i<=k.

this is equivalent to choose i egdes and sum the number of sets valid(that means f(X) includes these edges).

then we can DP with dp(i,j) means choose j edges in i's subtree, and each egde chosen has at least one node of its subtree in the vertex set. and then the answer is dp(1,i) minus unvalid ways, the latter is only possible when (j-1) edges are all in the other's subtree(and no vertex outside this subtree is in the set). you can enumerate the "highest" edge, and the ways of this can be easily gotten use dp values.

→ Ответить

SkySurfer

6 лет назад, # |

+31

I think problem C somehow matches to 990C - Bracket Sequences Concatenation Problem of previous codeforces contest ....

→ Ответить

PinkRabbitAFO

6 лет назад, # ^ |

Same feeling...

→ Ответить

yyash8000

6 месяцев назад, # ^ |

-8

yes seems same just the diffiernce is in cunting for balance strings

→ Ответить

Diego1149

6 лет назад, # |

+12

Could someone mind explaining to me why this solution for problem E doesn't work?

My approach is the same as described in editorial, except that I remove from list the maximum between LIS and LDS.

→ Ответить

6 лет назад, # ^ |

← Rev. 2 →

Unfortunately, that's just not efficient enough. That solution gives you $\text{[math]}$ sequences, but you need around $\text{[math]}$ .

The key to the solution is that, if the LIS isn't long enough, we take the entire set of decreasing subsequences, not just the longest decreasing subsequence. Note that in general, repeatedly removing the longest/last decreasing subsequence doesn't give you the minimum cover: consider 3 0 4 2 1: you might want to take 3 2 1, but the only minimal cover is 3 0 and 4 2 1.

→ Ответить

Diego1149

6 лет назад, # ^ |

Hmmm I'm still not fully sure I understand since at every single step I take the max between LIS and LDS, then shouldn't that mean that at least one of LDS or LIS should have size bigger K, for the case mentioned my code would work since if it takes 321 as LDS, then it would find 04 as LIS on the next step.

→ Ответить

6 лет назад, # ^ |

I don't have a case on hand which breaks it. Unfortunately, it's not true that either the LDS or the LIS has size at least K: see the sequence 3 6 9 2 5 8 1 4 7: both the LIS and LDS have size 3, but K = 4.

→ Ответить

riadwaw

6 лет назад, # ^ |

But in that case 3 is fine, because its length is 9, not 10 and 6 is doable in 3

→ Ответить

6 лет назад, # ^ |

+15

For N = 9, you need to solve it using 3 sequences. N = 6 only guarantees 3 additional sequences, so 9 — 3 = 6 isn't good enough.

If you want a larger case, the corresponding sequence for N = 25 has a similar issue: you can only remove 5 vertices from 5 10 15 20 25 4 9 14 19 24 3 8 13 18 23 2 7 12 17 22 1 6 11 16 21

→ Ответить

riadwaw

6 лет назад, # ^ |

My bad

→ Ответить

Diego1149

6 лет назад, # ^ |

So I get what you mean which is that in the worst case you will find that LIS and LDS are both sqrt(N), so its possible that there is some sequence where by taking sqrt(N) every time instead of sqrt(2*N) it will require more iterations :S

It just seems very hard to find such case...

I tried to find a test which breaks my solution so I ran a program which tested all 9! permutations for N=9 in my code and all of them passed with K<=3, so if there is a case that breaks it it's at least N=13...

Also, do you have any idea on how you would demonstrate that the complexity of my proposed solution is 2*sqrt(N)? I did a this very simple code, and it plots approx 2*sqrt(N), but I don't know how to demonstrate it formally:

function f(N) { // 10=> 4, 100=>16, 10000=>193, 1000000=>1990
  var ret=0;
  while(N) {
    N-=Math.ceil(Math.sqrt(N));
    ret++;
  }
  return ret;
}

After adding the condition if len<K grab the decreasing sequences LCS generated my code passes.

→ Ответить

6 лет назад, # ^ |

My submission failed on test 9, which had permutations of size ~25. Maybe try permutations like that?

→ Ответить

beast_pirate

6 лет назад, # |

Hey I need some explanation for problem D, how to calculate the DP states, otherwise the solution is understandable.

→ Ответить

https://codeforces.me/blog/entry/64310?#comment-482095

6 лет назад, # ^ |

→ Ответить

beast_pirate

6 лет назад, # ^ |

Thank you very much.

→ Ответить

_LeMur_

6 лет назад, # |

Can anyone explain in problem F Inclusion-exclusion. I don't understand the moment, that (i / x) is square-free.

→ Ответить

tfg

6 лет назад, # ^ |

← Rev. 2 →

+18

Solve this: https://codeforces.me/problemset/problem/803/F

Inclusion-exclusion for the problem above explained: https://codeforces.me/blog/entry/51755?#comment-356983 the formula using mobius is in the editorial (it's the same thing)

→ Ответить

_LeMur_

6 лет назад, # ^ |

← Rev. 2 →

I solved it :)

Thnanks!

→ Ответить

MagicSpark

6 лет назад, # |

← Rev. 3 →

-49

→ Ответить

Pretest

6 лет назад, # |

can anyone explain how to calculate dp[k][j]? I find it hard because dont we have to calculate gcd between dp[k][j] and p^j??

→ Ответить

6 лет назад, # ^ |

← Rev. 3 →

+18

$\text{[math]}$ ,because any t can be 0 ~ t with equal probability after an operation. You can notice that $\text{[math]}$ , so you can calculate it in O(α k).

→ Ответить

zeliboba

6 лет назад, # |

+13

May be this is my personal problem, but the value of k was misleading for me, if it was 10⁶ imo it will be better. For this value of k I wrote dp solution without knowledge of multiplicative function and it was very close to tl (about 3s on maxtest). When I wasted a lot of time I finally wrote correct solution, but this is D on div1+div2, so such trap is not good.

→ Ответить

Swistakk

6 лет назад, # ^ |

Actually I was a little afraid of having TLE even with correct solution. It was O(k log^2 n) with multiplications and modules. When I checked how long it takes on maxtest (2^something) it turned out it is quick, but it's not like k could have been increased significantly ... unless you would like to require binary exponentiation of matrices ;)

→ Ответить

zeliboba

6 лет назад, # ^ |

← Rev. 4 →

Hm, actually complexity equals $\text{[math]}$ , not $\text{[math]}$

→ Ответить

Swistakk

6 лет назад, # ^ |

Ah yes, you're right. I mean, my code has log^2, but it is trivial to improve that, but I didn't realize since it was sufficient.

→ Ответить

6 лет назад, # ^ |

I think if you calculate with $\text{[math]}$ it's $\text{[math]}$ , if you calculate with $\text{[math]}$ it's $\text{[math]}$ , isn't it?

→ Ответить

Siriuslight

6 лет назад, # |

In problem D, can someone please explain the recurrence of the DP.

→ Ответить