By awoo, history, 5 years ago, translation, In English

Hello Codeforces!

On 12.02.2020 17:35 (Московское время) Educational Codeforces Round 82 (рейтинговый для Див. 2) will start.

Series of Educational Rounds continue being held as Harbour.Space University initiative! You can read the details about the cooperation between Harbour.Space University and Codeforces in the blog post.

This round will be rated for the participants with rating lower than 2100. It will be held on extended ICPC rules. The penalty for each incorrect submission until the submission with a full solution is 10 minutes. After the end of the contest you will have 12 hours to hack any solution you want. You will have access to copy any solution and test it locally.

You will be given 7 problems and 2 hours to solve them.

The problems were invented and prepared by Roman Roms Glazov, Adilbek adedalic Dalabaev, Vladimir vovuh Petrov, Ivan BledDest Androsov, Maksim Neon Mescheryakov and me. Also huge thanks to Mike MikeMirzayanov Mirzayanov for great systems Polygon and Codeforces.

Good luck to all the participants!

Our friends at Harbour.Space also have a message for you:

Hello Muscat

Hi Codeforces!

This is not the last call for participation, but we’re almost there. We have extended the early bird discount deadline of Hello Muscat ICPC Programming Bootcamp until this Sunday, February 16th. Remember you can request a support letter to present to your university, employer or local companies to sponsor your participation and trip to the bootcamp.

Register now

We would also like to remind you that if your team is going to the ICPC World Finals in Moscow this June, you can fill out the form below to see if you are eligible for a full scholarship for our Bootcamp (flights not included), and we will contact you within three days to let you know about the results.

Fill out form

UPD: There will be 7 problems in the round

Congratulations to the winners:

Rank Competitor Problems Solved Penalty
1 tmwilliamlin168 7 294
2 Egor 6 173
3 ivan100sic 6 174
4 neal 6 175
5 244mhq 6 179

39 successful hacks and 147 unsuccessful hacks were made in total!

And finally people who were the first to solve each problem:

Problem Competitor Penalty
A Mprimus 0:01
B icecuber 0:04
C MylnikovNikolay 0:09
D waynetuinfor 0:11
E Mehrdad_Sohrabi 0:17
F wucstdio 1:10
G arknave 0:49

UPD: Editorial is out

  • Vote: I like it
  • +167
  • Vote: I do not like it

| Write comment?
»
5 years ago, # |
  Vote: I like it +3 Vote: I do not like it

second

»
5 years ago, # |
  Vote: I like it -21 Vote: I do not like it

OK, is it possible to achieve 1900 for me?

  • »
    »
    5 years ago, # ^ |
      Vote: I like it +29 Vote: I do not like it

    You could reach 2000 after this round. Set your dream high.

  • »
    »
    5 years ago, # ^ |
      Vote: I like it +1 Vote: I do not like it

    is it possible to achieve 1300 for me

»
5 years ago, # |
  Vote: I like it +1 Vote: I do not like it

Auto comment: topic has been updated by awoo (previous revision, new revision, compare).

»
5 years ago, # |
  Vote: I like it +2 Vote: I do not like it

It's time for me to become pupil. Goodbye, my specialist.

»
5 years ago, # |
  Vote: I like it +25 Vote: I do not like it

Codeforces Rounds are very good recently. All the best everyone.

»
5 years ago, # |
  Vote: I like it +98 Vote: I do not like it

Dear author of statement of problem B. Please learn what's the difference between weather and climate.

»
5 years ago, # |
  Vote: I like it +49 Vote: I do not like it

Would be better if D statement said "Your goal is to fill the bag with boxes completely."

It took me some time to understand how the bag and the boxes are related at all.

»
5 years ago, # |
  Vote: I like it +10 Vote: I do not like it

How to solve D ...?

  • »
    »
    5 years ago, # ^ |
      Vote: I like it +2 Vote: I do not like it
    1. Process the exponent (i) from 0 to 62 (actually 60, but it doesn't matter)

    2. If the i-th bit of n is set, then find the smallest existing box that is at least 2**i, then divide it by 2 until it is 2**i, creating two other boxes in each division. Then use a box of size 2**i.

    3. Then use all k boxes of size 2**i to create k/2 boxes of size 2**(i+1)

  • »
    »
    5 years ago, # ^ |
      Vote: I like it +1 Vote: I do not like it

    SUM = sum of all Ai. So if SUM < n answer is 0. else SUM = n + reminder. now go from big powers to small. a = 2^k. if reminder>=a so reminder-=a else if n>=a so n-=a else cnt[k-1]+=2 and start iterate on k-1.

  • »
    »
    5 years ago, # ^ |
      Vote: I like it +4 Vote: I do not like it

    Greedy. First for each power of 2 count how many boxes with this number we have. Then start looking at the bits of n, starting from the lowest one. If this bit is 0, we just go to the next bit, and in the meanwhile try to merge the boxes with corresponding size (2^i) to "create" boxes with a higher power of 2. If current bit is 1, we use the box of size 2^i, if possible. If it is not possible, we take the "nearest" box with bigger size and divide it until we get a box of the right size.

  • »
    »
    5 years ago, # ^ |
    Rev. 4   Vote: I like it +7 Vote: I do not like it

    You just need to construct all of the bits of number 'n' . Start from constructing lowest bit .for constructing ith bit first check if it can be constructed by numbers smaller than or equal to 2^i . Else you need to divide some number 2^j , j>i and j should be closest to i , see if this is possible .if no for some bit then -1 else answer is sum of number of divisions .

    of course above is just rough idea but you can go through the submission and ask if you have some doubt .

    submission 70903270

»
5 years ago, # |
Rev. 2   Vote: I like it +4 Vote: I do not like it

What's pretest 2 of prob/C

»
5 years ago, # |
  Vote: I like it +18 Vote: I do not like it

The memory limit on problem F is unnecessarily tight. There's no reason to MLE a solution that uses $$$\mathcal{O}(nmc)$$$ memory.

  • »
    »
    5 years ago, # ^ |
      Vote: I like it +3 Vote: I do not like it

    Unfortunately, we had to put tight memory limits to disallow solutions with dynamic connectivity offline approach.

    By the way, which approach uses $$$O(nmc)$$$ memory and cannot be modified to use $$$O(nm)$$$ memory?

    • »
      »
      »
      5 years ago, # ^ |
      Rev. 2   Vote: I like it 0 Vote: I do not like it

      It is possible to optimize the memory, but depending on the implementation it can be quite tricky. Currently I'm repeatedly running into either MLE from initializing too many hash tables or TLE from using map.

      I'm surprised offline dynamic connectivity is a concern. Shouldn't that just TLE with 2e6 since it's a $$$\log^2$$$ algorithm?

      • »
        »
        »
        »
        5 years ago, # ^ |
          Vote: I like it 0 Vote: I do not like it

        As far as I know, there is a way to write it in $$$O(q \log q)$$$ — but it still consumes $$$O(q \log q)$$$ memory.

        • »
          »
          »
          »
          »
          5 years ago, # ^ |
            Vote: I like it +1 Vote: I do not like it

          I didn't know that. What's the $$$q \log q$$$ technique?

        • »
          »
          »
          »
          »
          5 years ago, # ^ |
            Vote: I like it 0 Vote: I do not like it

          Simple way to solve it in O(Q*logQ) or whatever but with O(N*logN) memory:

          Solve for queries [0, N), [N, 2N), ... and so on, that's O(N*logN) memory and O(N*logN) complexity per batch with Q/N batches so it's actually O(Q*logN)

    • »
      »
      »
      5 years ago, # ^ |
        Vote: I like it +16 Vote: I do not like it

      Why did you want to disallow dynamic connectivity? It's harder to implement than the solution that uses the constraints on $$$c_i$$$ and it's nicer imo.

      I tried implementing dynamic connectivity during the contest and indeed it got MLE. I'm not sure if it would have passed time limit since it was really close tho.

»
5 years ago, # |
  Vote: I like it +5 Vote: I do not like it

Can Anyone Please Tell me what the mistake in my ....code... of problem D..

  • »
    »
    5 years ago, # ^ |
      Vote: I like it +2 Vote: I do not like it

    You should do (1LL<<smth) instead of (1<<smth) because it overflows.

  • »
    »
    5 years ago, # ^ |
    Rev. 2   Vote: I like it +3 Vote: I do not like it

    Now i got my mistake...I consider if any number x is divide by 2 then number become x/2. Then i consider only 1 frequency of x/2 But actually Now we have 2 frequemcy of x/2. I misunderstood the problem..

»
5 years ago, # |
  Vote: I like it +8 Vote: I do not like it

How to solve problem E?

»
5 years ago, # |
  Vote: I like it -11 Vote: I do not like it

Edu Round 81: copy ApIO 16
Edu Round 82: copy ApIO 17
Lets revise ApIO 18 for Edu Round 83.

»
5 years ago, # |
Rev. 3   Vote: I like it +27 Vote: I do not like it

How to solve G? I tried something like centroid decomposition + convex hull trick, but I guess it's too slow.

  • »
    »
    5 years ago, # ^ |
      Vote: I like it 0 Vote: I do not like it

    not slow

    • »
      »
      »
      5 years ago, # ^ |
        Vote: I like it +5 Vote: I do not like it

      nvm I'm retarded, I had stupid bug in my find centroid function.

  • »
    »
    5 years ago, # ^ |
      Vote: I like it +16 Vote: I do not like it

    It's centroid decomposition with convex hull trick. As TL is 6 seconds, it should pass.

  • »
    »
    5 years ago, # ^ |
    Rev. 2   Vote: I like it 0 Vote: I do not like it

    I tried too, but I had an error in my code during contest that I couldn't fix in time. However, after fixing it it gave me WA, i think I'm bad implementing the dynamic convex hull trick.

»
5 years ago, # |
  Vote: I like it 0 Vote: I do not like it

What is the dp state of problem E?

  • »
    »
    5 years ago, # ^ |
      Vote: I like it +15 Vote: I do not like it

    For each possible split t1 + t2 of the string t, dp[i][j] = "minimum prefix of s such that it contains non-intersecting i-th prefix of t1 and j-th prefix of t2"

    • »
      »
      »
      5 years ago, # ^ |
        Vote: I like it 0 Vote: I do not like it

      send your submitted code link

      • »
        »
        »
        »
        5 years ago, # ^ |
          Vote: I like it 0 Vote: I do not like it

        gotta say "please", at least...

        Is there anything particular in this dp that you don't understand?

  • »
    »
    5 years ago, # ^ |
      Vote: I like it +6 Vote: I do not like it

    First try every split of the string t and then dp[Position of current symbol in the string s][length of the first subsequence] — maximum number of symbols in the second subsequence.

  • »
    »
    5 years ago, # ^ |
      Vote: I like it 0 Vote: I do not like it

    (Mine is kind of weird, maybe there is a better one)

    Assume the first subsequence is of fixed length N. Then dp[i][j] = after taking the first j characters of string s, it is the largest length of second subsequence, given first subsequence has length i. If dp[|s|][N]=|s|-N, then we output YES. Now repeat for all possible N. If no such answer is found, output NO.

    Submission: https://codeforces.me/contest/1303/submission/70902911

»
5 years ago, # |
  Vote: I like it +13 Vote: I do not like it

F is so cool, thanks!)

»
5 years ago, # |
  Vote: I like it 0 Vote: I do not like it

Can anyone explain what was wrong in my code? At my Codeblocks give my code correct output. But after submitted it gets WA. Why? I got 6 times WA on the contest, also 14 minutes have lost :(.

https://codeforces.me/contest/1303/submission/70855140 https://codeforces.me/contest/1303/submission/70857302 https://codeforces.me/contest/1303/submission/70858601 https://codeforces.me/contest/1303/submission/70859156 https://codeforces.me/contest/1303/submission/70860530

»
5 years ago, # |
  Vote: I like it 0 Vote: I do not like it

Can anyone tell me error in my soln of B. 70896681

  • »
    »
    5 years ago, # ^ |
    Rev. 2   Vote: I like it 0 Vote: I do not like it
            if(g>=b)
                cout<<n<<"\n";
    

    i cant understands this, you can see my code

  • »
    »
    5 years ago, # ^ |
    Rev. 2   Vote: I like it 0 Vote: I do not like it
    else if((temp%g)!=0)
    {  
                    cout<<(tp*b)+temp<<"\n";
    }
    

    You need to check if the answer is no less than n, as in the following "else" statements. (Input: 10 3 4, Output 9, Answer 10)

»
5 years ago, # |
  Vote: I like it +25 Vote: I do not like it

Finally!!! i AC 4 problems on Div2!!! (LOL it's 1:00AM here, im going to sleep...

  • »
    »
    5 years ago, # ^ |
      Vote: I like it +6 Vote: I do not like it

    Imagine waking up and half of them had been hacked, just kidding :P
    Good night.

»
5 years ago, # |
Rev. 2   Vote: I like it 0 Vote: I do not like it

my submission for c

please help why this is not working

conditions checked

if size =1 ans is abcd.....

if anyone has more than 2 neighbours answer doesn't exist

if there is no element with 1 neighbours then also answer doesn't exist

please help

  • »
    »
    5 years ago, # ^ |
    Rev. 2   Vote: I like it 0 Vote: I do not like it

    If there is a cycle then there is no solution. Checking if there is someone with degree 1 is not enough.

    • »
      »
      »
      5 years ago, # ^ |
        Vote: I like it 0 Vote: I do not like it

      these conditions ensure that

      please give a test case that doesn't work on my code with above conditions.

      will be very helpful

  • »
    »
    5 years ago, # ^ |
    Rev. 2   Vote: I like it 0 Vote: I do not like it

    Your code does not correctly check the degrees > 2. abacad gives YES.

»
5 years ago, # |
  Vote: I like it +3 Vote: I do not like it

Hack my D solution. 70893301 Please!!!

»
5 years ago, # |
  Vote: I like it 0 Vote: I do not like it

WA on pretest 5 for B

  • »
    »
    5 years ago, # ^ |
      Vote: I like it 0 Vote: I do not like it

    nvm, made silly mistake of using float instead of double

    • »
      »
      »
      5 years ago, # ^ |
        Vote: I like it +9 Vote: I do not like it

      Better not to use floating point for integer arithmetic.

      • »
        »
        »
        »
        5 years ago, # ^ |
          Vote: I like it 0 Vote: I do not like it

        I was trying to find ceil(float(n)/g)

        • »
          »
          »
          »
          »
          5 years ago, # ^ |
            Vote: I like it 0 Vote: I do not like it

          use (n+g-1)/g which do not need float

»
5 years ago, # |
  Vote: I like it 0 Vote: I do not like it

can someone find a bug in my code for C 70902882 what im trying to do is create a graph of the given password where to nodes are connected if they are adjacent in the password. then i search for a position to start from(a node that has only one edge going out of it) and do a dfs from there to find if there are loops in the graph. If there aren't I have a found a possible keyboard, if there are their are no possible keyboards

  • »
    »
    5 years ago, # ^ |
      Vote: I like it 0 Vote: I do not like it

    if(a.size()!=2){cout<<"NO\n";continue;} But it can be string like this "abcbdbeba", in set a will be 'a','c','d','e'

  • »
    »
    5 years ago, # ^ |
      Vote: I like it 0 Vote: I do not like it

    ignore previous post, sorry if(a.size()!=2){cout<<"NO\n";continue;} if your input just one char like "e" so size of set a will be zero, but you output NO.

  • »
    »
    5 years ago, # ^ |
      Vote: I like it 0 Vote: I do not like it

    size of of vector a can be 4 if there are two connected component in graph with more than 1 vertices. it can be any even number.

»
5 years ago, # |
  Vote: I like it 0 Vote: I do not like it

Can anyone explain how to approach problem C?

  • »
    »
    5 years ago, # ^ |
      Vote: I like it +4 Vote: I do not like it

    Represent the keyboard as a graph: letters are vertices and edge between vertices 'a' and 'b' means that 'a' and 'b' should stand next to each other in the keyboard. You can create this graph simply by iterating through the input string and adding an edge between each pair of adjacent letters.

    The trick here is that the keyboard can satisfy the conditions iff it is a linear graph (maybe with some vertices with degree 0). The only thing you have to do is to check if the graph you have built is linear. The simplest way to do so is to make sure that, if all isolated vertices are removed, it is either empty or contains exactly two vertices with degree 1 (these will be the first and the last letters of the keyboard), and the rest of the vertices have degree two. If the graph is indeed such, you can output the keyboard by doing a dfs from one of the ends of this graph and then append all isolated vertices in the end.

    • »
      »
      »
      5 years ago, # ^ |
        Vote: I like it 0 Vote: I do not like it

      You could also print the BFS tour instead of using DFS, I think it's an easier solution, though I also did yours.

      • »
        »
        »
        »
        5 years ago, # ^ |
          Vote: I like it +1 Vote: I do not like it

        Well, it does not matter as there is only one next generation vertex every time. In fact, I just did it manually in this case :)

    • »
      »
      »
      5 years ago, # ^ |
        Vote: I like it 0 Vote: I do not like it

      What do you mean by "remove all isolated vertices?" Thanks

      • »
        »
        »
        »
        5 years ago, # ^ |
          Vote: I like it 0 Vote: I do not like it

        for example, you have ababab. All isolated vertices means cdef...z

      • »
        »
        »
        »
        5 years ago, # ^ |
          Vote: I like it 0 Vote: I do not like it

        ↑ that is exactly what I meant, vertices with degree 0.

»
5 years ago, # |
  Vote: I like it +4 Vote: I do not like it

I have a $$$O(\frac{448}{bitset}\sum n^3)$$$ way to solve E. First if we split $$$t$$$ into to parts, there is an easy way (DP) to solve the problem in $$$O(n^3)$$$ for each test case with a fixed midlle position $$$k$$$ in $$$t$$$. As there are $$$O(n)$$$ middle positoins, the approach above is $$$O(n^4)$$$.

To optimise, let std::bitset<448> be the type of $$$dp[i][j]$$$. If $$$dp[i][j][k]=1$$$, then it means that it is possible to get two subsequences from $$$s$$$ where $$$s_1=t[0-i]$$$ and $$$s_2=t[k-j]$$$. We iterate all characters in string $$$s$$$. If $$$s_i=t_i$$$, then we can update $$$dp[i+1][j]$$$ by $$$dp[i][j]$$$. If $$$s_j=t_j$$$, then we can update $$$dp[i][j+1]$$$ by $$$dp[i][j]$$$. To check the answer, just check if there exist a $$$i$$$ such that $$$dp[i][n][i]=1$$$.

code here

  • »
    »
    5 years ago, # ^ |
      Vote: I like it +9 Vote: I do not like it

    Actually, you can perform this approach without bitset. Observe we only need to hold the best possible length for the second part for any given length of the first part. Thus we only need dp[i][j]=best length of second part for each split, so O(n^3).

    Submission: https://codeforces.me/contest/1303/submission/70902911

    • »
      »
      »
      5 years ago, # ^ |
        Vote: I like it +2 Vote: I do not like it

      you are right. I only need the leftmost $$$1$$$ in $$$dp[i][j}$$$. sad

»
5 years ago, # |
  Vote: I like it +1 Vote: I do not like it

I don't understand the calculation for the 3rd example in problem B test case 1. Each cycle of weather takes 1000001 days, of which 1 day is good. As such one can repair 2 units on each cycle. The last two units can be repaired in 2 days, since we don't have to wait for the last cycle of weather to finish. This gives: 1000001 * ((1000000-2)/2) + 2 = 1000001 * 499999 + 2 = 499999499999 + 2 = 499999500001

The answer given in the problem statement is 499999500000 which is 1 less. How can one save a day without ending up with more bad pavement than good pavement?

  • »
    »
    5 years ago, # ^ |
      Vote: I like it +19 Vote: I do not like it

    You can have more bad pavements than good pavements during the days, it's only at the end that you can't.

    • »
      »
      »
      5 years ago, # ^ |
        Vote: I like it +8 Vote: I do not like it

      In other words, one can lay an extra section of bad pavement in some earlier cycle, so avoiding having to lay it at the end. That makes sense, thanks.

  • »
    »
    5 years ago, # ^ |
    Rev. 2   Vote: I like it 0 Vote: I do not like it

    it takes 500000 good days and 499999 period of bad days 1*500000 + 499999*1000000=499999500000

»
5 years ago, # |
  Vote: I like it +67 Vote: I do not like it
»
5 years ago, # |
  Vote: I like it 0 Vote: I do not like it

What is the binary search approach of problem B?

»
5 years ago, # |
  Vote: I like it -45 Vote: I do not like it

Previous contests of codeforces used to be much better. But these days contests have just become a waste of time. Most of the people are unable to reach the questions which are really interesting and actually need to be solved.Easy dp and graph problems need to be included in the contests.

  • »
    »
    5 years ago, # ^ |
    Rev. 2   Vote: I like it +15 Vote: I do not like it

    [user:Um_nik]Yes, you should look into this.

  • »
    »
    5 years ago, # ^ |
      Vote: I like it -19 Vote: I do not like it

    totally agree with you bro !! Also , they make 100 announcements during the contests , they better pay more attention while making the questions!

  • »
    »
    5 years ago, # ^ |
      Vote: I like it 0 Vote: I do not like it

    In this contest problem C can solved with graph theory, E is easy DP so what's the problem?

»
5 years ago, # |
  Vote: I like it 0 Vote: I do not like it

Can anyone please tell me the mistake in my solution for D? 70923522

»
5 years ago, # |
  Vote: I like it 0 Vote: I do not like it

Please help me on problem C, I don't know why my code runs into error in the test 2 ,I think the logic of the code is right. I use a pointer to record the position, and put ajacent keys into an array called res. Then I print the res and the other keys. Can anyone help me figure out the reason? Thank you very much! https://codeforces.me/contest/1303/submission/70923842

»
5 years ago, # |
  Vote: I like it 0 Vote: I do not like it

I am unable to understand the solution to problem D, can someone point me to some article(tutorial/video) where i can understand how this bit wise solution solves?. Thanks a lot in advance.

  • »
    »
    5 years ago, # ^ |
      Vote: I like it 0 Vote: I do not like it

    Let $$$C[2^k]$$$ be the number of boxes with a size $$$2^k$$$. Let $$$Small[2^k]$$$ be the sum of box sizes smaller than or same to $$$2^k$$$ (i.e., $$$\sum_{i=1}^k 2^i \cdot C[2^i]$$$.) Iterate $$$i = 1$$$ to $$$maxbit$$$ of long long signed integer. If the $$$i$$$th bit of $$$N$$$(the bag size) is $$$1$$$, then we have to fill bags with boxes using their sizes are smaller than or same to $$$2^i$$$. It is possible when $$$Small[i] \geq 2^i$$$. But if not(i.e., $$$Small[i] < 2^i$$$), we have to divide a bigger box into the size $$$2^i$$$. Dividing procedure is quite implementive. I hope my submission would be helpful. 70933987

    • »
      »
      »
      5 years ago, # ^ |
        Vote: I like it +8 Vote: I do not like it

      Thanks for your explanation, i need to ponder over it.

»
5 years ago, # |
  Vote: I like it +24 Vote: I do not like it

Problem G is exactly the same as a problem I set months ago,TSUM2Is it a coincidence?

»
5 years ago, # |
  Vote: I like it +11 Vote: I do not like it

The fastest system test ever

»
5 years ago, # |
  Vote: I like it +14 Vote: I do not like it

So is there a tutorial?

»
5 years ago, # |
  Vote: I like it +1 Vote: I do not like it

So...is there a tutorial?

My friends told me how to solve F and G but I can't understand them :C,I think I need the tutorial to help me :C

»
5 years ago, # |
  Vote: I like it 0 Vote: I do not like it

Can someone please explain to me why my code runs differently on codeforces from all other ides that I've tried. My code fails the first test case but if you run the code on any ide,It gives the correct output. Here's the link:https://codeforces.me/contest/1303/submission/70891793

  • »
    »
    5 years ago, # ^ |
      Vote: I like it 0 Vote: I do not like it

    It gets wrong answer on my computer, too. :(

  • »
    »
    5 years ago, # ^ |
      Vote: I like it 0 Vote: I do not like it

    The problem said that you shouldn't minus one on d.size(), the data type of d.size() is unsigned integer, which means you can't get a negative number by doing any calculation. You'd better put it as pt+1 == d.size(), which is equal to your original expression.

»
5 years ago, # |
  Vote: I like it 0 Vote: I do not like it

Attention!

Your solution 70857539 for the problem 1303A significantly coincides with solutions hinatahentai69/70857303, 1412neerujjain/70857539. Such a coincidence is a clear rules violation. Note that unintentional leakage is also a violation. For example, do not use ideone.com with the default settings (public access to your code). If you have conclusive evidence that a coincidence has occurred due to the use of a common source published before the competition, write a comment to post about the round with all the details. More information can be found at http://codeforces.me/blog/entry/8790. Such violation of the rules may be the reason for blocking your account or other penalties. In case of repeated violations, your account may be blocked.

I received this message 3hr ago. I want to apologize about the submission as both of them were mine. I used 2 accounts to submit it. I wasn't aware of the consequences it could hold. I am really very sorry about the wrong doing and wont repeat the same thing again. Please don't block my account :(

  • »
    »
    5 years ago, # ^ |
      Vote: I like it 0 Vote: I do not like it

    If it's the first time you used two account to check your answer, I think it won't get your account banned . As it says in statement, 'In case of repeated violations, your account may be blocked.'.

    However, you should trust the cheat detection system and don't do that again.

»
5 years ago, # |
  Vote: I like it +1 Vote: I do not like it

Give us the tutorial, plz!

»
5 years ago, # |
  Vote: I like it +1 Vote: I do not like it

waiting for the tutorial

»
5 years ago, # |
  Vote: I like it +1 Vote: I do not like it

Please Release the editorial.

»
5 years ago, # |
  Vote: I like it 0 Vote: I do not like it

Auto comment: topic has been updated by awoo (previous revision, new revision, compare).

»
5 years ago, # |
  Vote: I like it 0 Vote: I do not like it

Auto comment: topic has been updated by awoo (previous revision, new revision, compare).