include&lt;stdio.h&gt;

7 years ago, # ^ |

Actually, you don't need to use binary search. http://codeforces.me/contest/919/submission/34803226 The complexity is O(number of digits in answer * 10) for computing the table ignoring the need to use BigInt.

→ Reply

Fullmetal_Algorithmist

7 years ago, # ^ |

Could you please explain your idea a bit. I saw your code but didn't quiet understand what you were doing.

→ Reply

7 years ago, # ^ |

← Rev. 2 →

dp[i][s] = number of numbers with i digits (leading 0-s counts) and sum of digits s

Every possible number [i][s] is a path from [i][s] to [0][0]. So you start looking at some number of digits and the sum you want. Try putting a 0 in the last position. dp[i — 1][s — 0] is the number of such numbers. If that's lesser than the n that you are looking for, you know that the number you want has some number greater than 0 in this position, so you exclude the numbers that have the same prefix and 0 in this position (n -= dp[i — 1][s — 0]) and try it for 1. Keep on trying for all the next digits 0 <= j <= 9 until n <= dp[i — 1][s — j]. Now you know that the number you are looking for has digit j in this position and can do the same process for i — 1 until getting to i == 0.

→ Reply

Qhb

7 years ago, # ^ |

Awesome idea!! You must have a deep understanding in dp. The way you formulate dp[i][j] really surprised me (dp in dp)! Learned a lot from your word and code.

But I think n >= dp[i — 1][s — j] should be n <= dp[i — 1][s — j]. Is that right?

→ Reply

7 years ago, # ^ |

That's right! My mistake.

→ Reply

atulep

6 years ago, # ^ |

Thanks for the detailed explanation. As a follow-up question: why do we need to exclude the numbers that have the same prefix and digit j in position i (n -= dp[i-1][s-j])?

→ Reply

6 years ago, # ^ |

In this way to code dp on digits, you fix a prefix and look for the next digit. If you are looking for the n-th number and there are more than less dp[i-1][s-j] < n numbers, the next digit will be j+1 or higher and you are looking for n — dp[i-1][s-j] numbers.

→ Reply

mj_humble_beginner

6 years ago, # ^ |

@tfg, I finally managed to understand your solution (not really intuitive). I think it would have helped to mention the following:

1) The last (leftmost) digit is being set to the value of "j".

2) The last coloumn (index = 10) in the constructed table is not exactly similar in meaning as the others. It seems that it is a sum of the number of all 1 to i-digit numbers with sum of digits = 10.

For example, i = 3, j = 10, dp[i][j] = 63 (which is not the total number of 3-digit numbers with sum = 10).

Also, is there a simple approach to come up with this intuition ?

→ Reply

6 years ago, # ^ |

You seem to have missed the part that I said "dp[i][s] = number of numbers with i digits (leading 0-s counts) and sum of digits s", "leading 0-s counts"

A simple approach to come up with this intuition is solving digit dp problems.

→ Reply

aaket.c

5 years ago, # ^ |

However the answer exceeds 10^18 when k=10^18 which will cause overflow in case of your solution. However, we can try something like this. https://codeforces.me/contest/919/submission/65572372

→ Reply

ASHWANTH_K

10 months ago, # ^ |

digit dp is way more faster:
https://codeforces.me/contest/919/submission/242635982

→ Reply

ILoveBitches

7 years ago, # |

← Rev. 4 →

-10

http://codeforces.me/contest/919/submission/34773513

http://codeforces.me/contest/919/submission/34770710

Same Solution. Different Verdict . What type of Judge ?

→ Reply

7 years ago, # ^ |

Java programs inherently use more memory than C/C++ programs. Using System.gc() might help (it recommends invoking the garbage collector, but just like inline functions in C, there is no guarantee that it will happen).

→ Reply

ILoveBitches

7 years ago, # ^ |

-11

Java Compiler Automatically collects garbage whenever not necessary. So no need for any external Garbage Collector. And If Java Programs uses more memory Why There are no different memory limits for different languages ?

→ Reply

7 years ago, # ^ |

+10

That's the thing, the java garbage collector is invoked whenever it "thinks" there's some memory to free, but that may not be immediately apparent to it (how does it know for sure you won't be needing this bit of memory in the future?). System.gc() doesn't invoke an "external Garbage Collector", it invokes the normal java garbage collector (or at least it recommends its invocation), but it invokes it NOW (at the point of the instruction), not when the system finds it necessary.

I've had some problems in the past where a well-placed System.gc() made the difference between MLE and Accepted (I've also had situations where using that instruction made things worse... the gc is just very unpredictable).

As for your second question, on some online judges there ARE actually different memory limits for Java :). There might also be some problems on codeforces which have different memory limits (not sure). Just not this one :)

→ Reply

7 years ago, # ^ |

By the way, in the Java solution you use LinkedList to store the graph, whereas in the C++ solution you use vector, which is the equivalent of ArrayList in java. Not the same thing :). Linked lists inherently occupy more memory (there's pointers to be stored in addition to the data).

I've replaced LinkedList with ArrayList in your solution and it got accepted. As a general rule of thumb, never use linked lists unless you specifically need them for something (for example, deletion of elements form the middle).

→ Reply

farmersrice

7 years ago, # ^ |

+16

Just use C++, I used java in the past and it sucked.

→ Reply

quachtridat

7 years ago, # |

The k=1 case in problem C does hurt lol. Got hacked, though my code is fairly straightforward still.

Also, is it a right way to solve D by merging strongly-connected components into one node and do the calculations? Just discussed with my friend and I haven't tried this approach.

→ Reply

Jonno

7 years ago, # ^ |

In D, if you have a SCC of size > 1 then you have a cycle and just output -1. In the other case, every SCC must have size = 1 so there is no need to "merge" them, because is the same as using the original nodes.

So for your answer, I think it is valid but it is unnecesary :p

→ Reply

S.Jindal

7 years ago, # ^ |

For a DAG, the number of strongly connected components is equal to n (the number of nodes)

→ Reply

Pennyroyal_Tea

7 years ago, # |

To be precise complexity of brute force in B is O(ans * log(ans)) :D

→ Reply

7 years ago, # ^ |

Yeah, since you need to add all the digits, which requires logarithmic number of additions.

→ Reply

vivekchandela2

7 years ago, # |

CANNOT UNDERSTAND WHAT IS WRONG WITH THIS CODE..ITS GIVING 0.00000 for the first test case...works fine on my compiler

include<stdio.h>

int main()
{
    double n,m,a,b;
    int i;
    double min=100000;
    scanf("%lf%lf",&n,&m);
    for(i=0;i<n;i++)
    {
            scanf("%lf%lf",&a,&b);
            double c=m*(a/b);
            if(c<min)
            { 
                        min=c;
            }
    }
    printf("%lf\n",min);
return 0;
}

→ Reply

Jonno

7 years ago, # ^ |

What compiler are you using for submitting? You can also try to use cout, input/output is the only I see that could be giving the error

→ Reply

7 years ago, # ^ |

The code you posted works just fine. I submitted it now and got acc.

→ Reply

sasasagagaga

7 years ago, # ^ |

To print double you should use %f format specifier in printf due to floating point promotion in functions with variable number of arguments (printf is such a function). So I just deleted 'l' in "%lf" in printf and got AC: 34779977

→ Reply

https://ideone.com/Kpl1jy

7 years ago, # ^ |

← Rev. 3 →

%lf is the correct format specifier for double

%f is the format specifier for float

Floating point promotion means float gets promoted to double, which means you should always use %lf instead of %f (not the other way around). However, for that very reason, (for printf at least) %f is exactly the same as %lf. It's not that %lf doesn't work due to promotion, it's that %f ALSO works due to promotion.

The above code works just fine (I submitted it and got ac, with %lf, just like it was posted). No need to modify anything.

EDIT: I'm talking about C++ 11 and later (I don't know the standard all that well for previous iterations). As I'm typing this it occurs to me the question was not meant for C++, but for C and it seems like %lf for printf does indeed cause undefined behavior for C90 standard and lower (but codeforces uses newer standard, so the posted code still gets accepted even with C compiler).

→ Reply

sasasagagaga

7 years ago, # ^ |

What I've written is just a simple way to remember where to use %f and where to use %lf. But the best way to remember that is to learn it.

I was talking about C11 standard of language C. I chose this standard because first submission of vivekchandela2 for this task used exactly this standard. Here you can check it: 34744000.

→ Reply

Nuu

7 years ago, # ^ |

← Rev. 2 →

Try submit using a different compiler. Like GNU C ++ 11.

→ Reply

FastestFinger

7 years ago, # |

Please add Tutorial for Problem F as well.

→ Reply

DaysGone

7 years ago, # |

← Rev. 2 →

FOR PROBLEM B hehe i stuck in the optimisation for this code ignoring that brute force can be run easily for this code ..i was just trying that for a no < 100 starting from ...

19 add 9 for every no to be build which is a perfect positive integer and for 91

ADD 18 to get 109 then again add 9 .... to get the last 190 then add again 18 to obtain 208 then add 9..... finally till now the factor which we are adding to obtain next term is 18 ..now when 208 is added with 9 so and so on till 280 is reached then increment factor with 9 and add 280+(18+9) since prev value of factor is 18 update it to 18+9

to obtain 307 goes till this series

until the last series becomes like this 901 910 then here factor will be 81

but for next term add (81 not with 9 but with 18) to get 910+(81+18) = 1009

then make factor -> 0 and again keep adding 9 to the nos till 1090 is reached then do the above firstly mentioned steps .. that is 1090+(factor+18) to get 1108 then add successivley 9 til 1180 is not reached and then factor will always be updated by 9 that is 1180+(value of factor till here +9) to get new value of next term having sum = 10

perform this till the new 2 term series is not obtained .. I have observe many things about numbers regarding this question but i am so sure some of the cases might not fit in my factor adding approach because in some cases i observed like 1801 1810 (when series like this ) i cant add 1810+(val of factor till here + 18) since it will not yield me the perfect positive integer some other cases also are hot handled by my optimisation but i want that someone plzz understand this and can do further optimise it without using brutforce till 1000000000000(as an estimate no)

Because this code will runs in O(k) iterations rather than some large estimate . Plzz ignore me if i said something wrong . plzz give feedback thnkss

→ Reply

bounce_back20

7 years ago, # |

can anyone please tell why am I getting TLE(in 15th test case) IN 4TH question ?

→ Reply

jonsnow7

7 years ago, # |

← Rev. 3 →

can anyone explain why I am getting tle on test case 32 in problem d(Java)? http://codeforces.me/contest/919/submission/34773289

update: same c++ solution of mine is got accepted but it is giving tle in java. link to c++ code http://codeforces.me/contest/919/submission/34778298

→ Reply

kpw29

7 years ago, # |

There should be a nice and fairly easy solution for problem E with generators (prime roots). We know which power of g is a, which one is g, so we are just left with a simple congruence on exponents. Finding stuff can be done in O (p) instead of writing some sqrt algorithms, because p is nice

→ Reply

Bengal_Tiger

7 years ago, # ^ |

kpw29 would you please explain in more details. i am very weak in maths.

→ Reply

7 years ago, # |

Is the brute-force for B really O(answer)? I mean.. computing the sum of digita on n takes log(n) time does it not?

→ Reply

7 years ago, # ^ |

with base 10; that is at max 7, which can be considered a constant.

→ Reply

7 years ago, # ^ |

Time complexity is about infinitely large inputs, so you can't just say "it's considered" to be a constant. Though in this problem, it's indeed quite trivial, but it's still an O (answer * log (answer)) solution.

→ Reply

7 years ago, # ^ |

If the input is infinitely large, I don't think we should worry about complexity at all. It will just take infinite time not matter what the complexity is.

My point was that since the base is 10; its even smaller factor than our regular log₂n

→ Reply

7 years ago, # ^ |

That's right. The factor is really small. However, mouse_wireless was talking about the complexity, not how much actual time it takes within the input range, and that is what it means.

Time complexity is about how the time "asymptotically increases" as the input increases infinitely. Therefore, it's about the algorithm itself, not about the actual time consumed for "some" inputs.

Bubble sort has worst case complexity of O(N^2). You can say that if N is like 3, the factor is very small so you can almost ignore it. But no matter what that N is, it doesn't change that the complexity of bubble sort is still O(N^2), because it's the property of the algorithm itself.

I see your point but you should choose correct words.

→ Reply

7 years ago, # ^ |

I was trying to tell mouse_pointer not to nitpick such a small factor but I guess lots of people are too sentimental about it.

→ Reply

7 years ago, # ^ |

My solution is O(answer) using O(answer) memory for memoization of the sum of digits. http://codeforces.me/contest/919/submission/34749833 :P

→ Reply

baghead

7 years ago, # |

← Rev. 3 →

+10

Can somebody elaborate on Div2E

I seem to be deriving j - i ≡ b·a^- j(mod p)

Thanks!

Edit: They edited the editorial, all clear now :)

→ Reply

f2lk6wf90d

7 years ago, # ^ |

-14

$\text{[math]}$

→ Reply

7 years ago, # ^ |

← Rev. 3 →

You are correct too, next line in the editorial explains your result.

You equation becomes: j = b.a^-j + i*p (mod p)

Edit: no this is wrong, should be j = b.a^-j + (p+i) (mod p) (editorial is clearer now)

Now read the next line in the editorial:

the possible i can only be b·a - j, p + b·a - j, ..., p·t + b·a - j. Then we can calculate how many possible answers n in this situation (i.e. decide the maximum possible t using the given upper bound x).

→ Reply

mohamed.amin

7 years ago, # ^ |

← Rev. 2 →

mkagenius sorry but I don't see your point ?

→ Reply

7 years ago, # ^ |

No, that’s wrong you cannot add p, 2p, ...., tp from thin air. Their mod p is not 0. They have to come somewhere from the equation.

→ Reply

baghead

7 years ago, # ^ |

← Rev. 3 →

It's like saying 2 = 2, 2 = 2 + 0, 2 = 2 + 2 * 0 ..., 2 = 2 + t * 0

We can add any multiple of p to both sides because any multiple of p is zero modulo p

→ Reply

JayZhan

7 years ago, # ^ |

in editorial i=y mod p and what is (i-y+p)%p stand for? why i-y?

→ Reply

7 years ago, # ^ |

← Rev. 2 →

They have updated the editorial, it should be clearer now.

→ Reply

JayZhan

7 years ago, # ^ |

finally ,it is really clear now

→ Reply

nivin

7 years ago, # ^ |

I didn't understand what they mean by looping section?

→ Reply

7 years ago, # ^ |

The given term n*a^n mode p has a period of p*(p-1) always (sometimes less, but definitely repeats after p*(p-1) terms)

→ Reply

motatoes

7 years ago, # |

Can someone tell me why my submission for C fails in TC 32 ?

→ Reply

rotavirus

7 years ago, # ^ |

Swap these lines:

  char** c = new char*[n];

and

  cin >> n >> m >> k;

→ Reply

zro_ZQC_orz

7 years ago, # |

← Rev. 2 →

+19

My solution here for B is $\text{[math]}$

34769949

First, let’s binay search the answer x

Then our job is to check if there are more than k perfect numbers less than x

Let f(i,j) represent for the previous i digits, the sum is j, how many numbers can we have. Which is a classical digital dp.

I was retarded during the contest and thought k was smaller than 1e5, that’s why I solved B last and didn’t work out E, R.I.P.

→ Reply

Fullmetal_Algorithmist

7 years ago, # ^ |

You aren't the only one. Exactly same thing happened to me.

→ Reply

noob__coder

7 years ago, # |

Why my code for D is giving wrong answer in TC 7. I used dfs to count the frequency in every path. In the worst case scenerio my code should give TLE, but I can not comprehend why it is giving me wrong answer. Here is my implementation.

→ Reply

-osdajigu-

7 years ago, # ^ |

Hi, maybe is because of the line vis[i] = true; in the for in solve function

→ Reply

noob__coder

7 years ago, # ^ |

Thanks. I see the mistake now. Anyway my way of solving this will give tle because of brute force approach.

→ Reply

-osdajigu-

7 years ago, # ^ |

yeah but it is not difficult to change, only add some memoization since the graph now is acyclic.

→ Reply

noob__coder

7 years ago, # ^ |

I am not that comfortable with DP, Can you show me how can I use memoization. [ I am aware of the concept]. Here is my TLE code. Thanks in advance.

→ Reply

-osdajigu-

7 years ago, # ^ |

this is my implementation.

So basically you try to count for every letter what is the maximum number of times can appear in any path starting at node u. And the maximum is the answer.

→ Reply

SrO

7 years ago, # |

I hacked 2 people in problem C, because they're not careful when k=1.

→ Reply

oskar

7 years ago, # ^ |

I hacked 10 people in problem C, because they're not careful when k=1.

→ Reply

zjuwyz

7 years ago, # ^ |

I was hacked immediately after I submitted problem C, for i'm not careful when k = 1.

Well...it could be worse, at least i have a chance to correct it.

→ Reply

SrO

7 years ago, # |

← Rev. 3 →

I use dfs+dp in problem D. Dfs to find cycle. When there is a cycle, I will output -1. Dp to calculate which is the maximum number.

→ Reply

SrO

7 years ago, # |

You needn't judge every number in problem B. You only need to judge x which x%9==1.

→ Reply

piewpiew

7 years ago, # |

Can someone tell me why my solution for D fails?

→ Reply

NursuItanToishybek

7 years ago, # |

What's wrong with this code?

460C

→ Reply

Suika_predator

7 years ago, # ^ |

In your code, line 27...

for(int j = 0; j < m; j ++)
	{
		for(int i = 0; i < m; i ++) //here, m -> n
		{
			s += c[i][j];

→ Reply

Nomorecheating

7 years ago, # |

Problem E was such a nice number-theory problem for beginners :D

→ Reply

http://codeforces.me/contest/919/submission/34794840

7 years ago, # |

← Rev. 4 →

In problem E, the 'looping' mentioned in the editorial mod p(p - 1) can be proved.

From Euler's Theorem, $\text{[math]}$ , for any integer n. Since φ(p) = p - 1, we only need to consider powers of a ranging from 0 to p - 2. This gives us two congruences:

$\text{[math]}$ $\text{[math]}$

This system of congruences then has a unique solution mod p(p-1)), by the Chinese Remainder Theorem, which gives us the 'looping'.

Edit: Fixed formatting and notation: Fermat's Little Theorem -> Euler's Theorem.

Edit 2: The proof also gives a way to solve the problem using the Chinese Remainder Theorem, which is slightly different from the method mentioned in the editorial in its approach.

The idea follows directly from above: for each $i$ from 0 to p - 2 the above system of congruences can be solved uniquely mod p(p - 1), and the contribution of each of these to the final answer can be counted easily.

See 34764463.

→ Reply

vaibhav1997

7 years ago, # ^ |

In the editorial why did we take n = i*(p — 1) + j ?

→ Reply

shreybatra

7 years ago, # |

← Rev. 2 →

Can anyone please help with Problem D... this solution is giving wrong on test 7.

The test case is huge to manually check it.

Thank you

→ Reply

litmxs

7 years ago, # ^ |

try this date case

5 5 abaaa 1 2 1 5 2 3 3 4 5 3

The true answer is 4

You did not think about the nodes you visited before(the nodes that visi[i] == true)

→ Reply

zdw1999

7 years ago, # ^ |

Try this:

: )

→ Reply

7 years ago, # |

Auto comment: topic has been updated by jinlifu1999 (previous revision, new revision, compare).

→ Reply

MonsterInMe

7 years ago, # ^ |

could you tell the way on how to solve problem B by (dp+binary.s) or any other for BONUS 1 and 2
(sorry for my bad English :P)

→ Reply

7 years ago, # |

Auto comment: topic has been updated by jinlifu1999 (previous revision, new revision, compare).

→ Reply

saisurya027

7 years ago, # |

Can Someone please Explain E from expressing n as i*(p-1)+j.

Thank you.

→ Reply

7 years ago, # |

Auto comment: topic has been updated by jinlifu1999 (previous revision, new revision, compare).

→ Reply

rotavirus

7 years ago, # |

Can you please explain how did you get C(m+k-1,k) in F?

→ Reply

teja349

7 years ago, # ^ |

That is nothing but number of solutions to
x₀ + x₁ +x₂+x₃+ x₄ =8 in this question. Similarly extend to general case

→ Reply

fatemer

7 years ago, # |

hey! can you please explain why i got a TLE error on this code? it seems pretty optimized to me! thanks :)

#include <iostream>
#include <vector>
#include <set>
using namespace std;

typedef vector<int> vi;
typedef set<int> si;
typedef vector<si> vsi;

vsi edge;
vector<char> nodes;
vector<int> visit;
int maxnum = -1;
bool cycle = 0;

void dfs(int cur, vi dp)
{
    visit[cur] = 1;
    if(maxnum < ++dp[nodes[cur]- 'a']) maxnum = dp[nodes[cur]- 'a'];
    for(auto i: edge[cur])
    {
        if(cycle == 1) return;
        if(visit[i] == 1)
        {
            cycle = 1;
            return;
        }
        dfs(i, dp);
    }
    visit[cur] = 2;
}

int main() {
    ios::sync_with_stdio(false);
    int n,m;
    cin >> n >> m;
    visit.resize(n);
    edge.resize(n);
    vi inedge(n);
    for(int i = 0; i < n; i++)
    {
        char c;
        cin >> c;
        nodes.push_back(c);
    }
    for(int i =0; i < m; i++)
    {
        int x,y;
        cin >> x >> y;
        if(x == y) cycle = 1;
        else
        {
            edge[x-1].insert(y-1);
            inedge[y-1] = 1;
        }
    }
    vi dp(26);
    for (int i = 0; i< n; i++)
    {
        if(visit[i] == 0 && inedge[i] == 0) dfs(i, dp);
        if(cycle == 1) break;
    }
    if(cycle == 1) cout << -1;
    else cout << maxnum;
    return 0;
}

→ Reply

berserker

7 years ago, # ^ |

Passing vector dp by copy add & after vi.

→ Reply

chandan5284

7 years ago, # |

What is looping section in problem E editorial??

→ Reply

7 years ago, # ^ |

The given term n*a^n mode p has a period of p*(p-1) always (sometimes less, but definitely repeats after p*(p-1) terms)

→ Reply

7 years ago, # ^ |

← Rev. 2 →

Actually, it will always be p(p - 1). Check my comment above for the details.

If the period was less than that, it would mess up the counting.

Edit: I was wrong, ignore this.

→ Reply

7 years ago, # ^ |

No, sometimes it repeats with period p*(p-1)/2 as well. Just check with 7 as P and 3 as A. And it won’t mess up your counting as it definitely repeats after p*(p-1) as well (coz divisible).

→ Reply

7 years ago, # ^ |

Huh. You're right, period p(p - 1) / 2 does occur sometimes too. My bad, then.

Your example is a bit wrong though. p = 7 and a = 3 still gives a period of p(p - 1). Instead, p = 11 and a = 3 gave me a period of p(p - 1) / 2.

→ Reply

7 years ago, # ^ |

Yeah, it was probably 7 and 2. Sorry I have a bad memory.

→ Reply

7 years ago, # ^ |

7 and 2 does indeed give a period of p(p - 1) / 2.

And yeah, counting doesn't get messed up because we're doing the counting mod p(p - 1) no matter what, so repeats within that will be counted separately.

→ Reply

7 years ago, # |

For F,this is what you said: "First we should notice that the useful number of states isn't something like (8^5)^2" Maybe it isn't something like (5^8)^2,right?

→ Reply

wakillsmeinside

7 years ago, # |

can someone help me out ? I submitted problem D with my data structures statically sized using SIZE.I got MLE when my SIZE was 1000005 in the 6th test case. but when i changed it to 300005 I got AC. my question is , why didn't i get MLE in the first test case itself as the data structures are static? MLE :34803955 AC :34804264

→ Reply

nagasawa

7 years ago, # ^ |

← Rev. 2 →

So what's wrong? You were trying to allocate more than 256 MB memory (3 * 10^7 long long array is 230 MB).

→ Reply

wakillsmeinside

7 years ago, # ^ |

← Rev. 2 →

why didn't I get MLE in first test case ? btw i allocated 1e6

→ Reply

nagasawa

7 years ago, # ^ |

← Rev. 2 →

Well, not all of your data structures are static. You have set ms; and you insert n elements in it, so in the first cases there is enough memory for your program. Why 1e6? You have ll dp[SIZE][30]; So you allocated 30 * SIZE = 3 * 1e7.

→ Reply

drunk_philosopher

7 years ago, # |

Can anybody give a proof why Problem D can't be solved using only DFS?. Keep counting the frequency of each letter in the traversal and record the maximum. -1 if cycle is found. I haven't solved it yet, but was wondering. Thanks

→ Reply

wakillsmeinside

7 years ago, # ^ |

no , it can't be solved using DFS only. Take for example a graph with edges :1->2 , 2->3, 2->5, 3->4 , 4->6. As in DFS you only visit a vertex ONCE , the vertex 6 won't have the frequency table of 5 in it. the way i solved it was for every node , find the frequency table of its parent(s) and record the maximum. my code is kind of messy but the function you want to see is the dfs one. code : 34804264

→ Reply

15_percent_vat

7 years ago, # |

In problem F, how to deal with cycles?

→ Reply

7 years ago, # ^ |

+15

We don't need to do anything to that :)

Those which we don't meet in BFS (toposort) will be "DEAL".

BTW, You can give all states a "DEAL" tag for initialization.

→ Reply

arasmus

7 years ago, # ^ |

can u go in more detail!plz

→ Reply

arasmus

7 years ago, # ^ |

perhaps represent what u mean visually

→ Reply

7 years ago, # |

← Rev. 2 →

In problem F,when current status is in circle,but I have other succeed status which are all lose states.Maybe I can go into one of the lose states and win instead of make it deal.With topological sort we can have the correct answer for this status,but what about the previous status?The previous status maybe not visited.How to deal with this problem?

→ Reply

7 years ago, # ^ |

Maybe only BFS is ok?

→ Reply

snpky

7 years ago, # |

← Rev. 2 →

For Problem B. My Solution. Instead of iterating each and every value of n, I am finding the next Perfect Number in each iteration.

→ Reply

7 years ago, # |

It came as a surprise to me when I found out k=1 was NOT in the pretests for problem C. I thought about trying to look for solutions which didn't treat this case but I thought surely it must have been in the pretests (usually pretests contain small cases like n = 0, 1, 2) so I decided to pass (I usually never go for hacks anyway, I prefer trying to solve more problems).

→ Reply

FuckKrydom

7 years ago, # |

Why the graph we built in F don't have any circle?

→ Reply

7 years ago, # ^ |

The graph may have cycles,but with topological sort we won't visit those cycles.

→ Reply

7 years ago, # ^ |

The states which were not visited will not be marked,so "Deal" only happens when ans[s1][s2]=0. But I think topological sort has a small problem,as I said here.

→ Reply

JHSN

7 years ago, # |

← Rev. 2 →

For problem F bonus, the answer is the number of non-negative integer solution of x₀ + x₁ + x₂ + x₃ + ... + x_m - 1 = k.

It seems to be $\text{[math]}$ , and the number of status in the problem F is $\text{[math]}$ instead of 245025, right?

→ Reply

7 years ago, # ^ |

It is $\text{[math]}$ ,because the number of solutions of x₀ + x₁ + ... + x_n = k is $\text{[math]}$ .
You can see it as combination with repetition.
Wikipedia has an article about this,see here.

→ Reply

JHSN

7 years ago, # ^ |

Oh, I mixed up m and k. It should be $\text{[math]}$ . Thx

→ Reply

7 years ago, # |

Auto comment: topic has been updated by jinlifu1999 (previous revision, new revision, compare).

→ Reply

apoorv1999

7 years ago, # |

In the 2nd question, the code I've written works perfectly on my system, but when I uploaded it, it showed me a wrong answer. After the contest, when I executed the test case which went wrong on my own system, it showed the correct answer. Could anyone please help me in identifying the mistake?

1st submission: http://codeforces.me/contest/919/submission/35751191

^ Passed only the first test case

2nd submission: http://codeforces.me/contest/919/submission/35751331

^ passed two test cases, even though I changed just the starting number, from 19 to 1

both the codes are working perfectly on my system

→ Reply