vfleaking's blog

Codeforces Round #250
By vfleaking, 10 years ago, In English

Happy Children's Day everyone. What should you do to celebrate the special holiday?

Of course, another Codeforces Round is your best choice!

There is a child who is our friend. Now he has faced a lot of algorithm problem, could you please help him?

We invite you to participate in Codeforces Round #250, which will take place at 17:00 MSK on 6.1 — Children's Day. This round will be held in both divisions.

Note that the starting time of this round is quite unusual.Why? Because it's yet another CF Round held by Chinese! We prepared many interesting problems for you.

Are you getting excited? Don't miss this round!

The problems were prepared by delayyy, Picks and me. This is our first Codeforces round~~~~.

Many thanks to Gerald, who gave us enormous help during the preparations for this round; to ftiasch, Kissshot and jqdai0815, who are the testers of this round; and to MikeMirzayanov, who created such a wonderful platform.

In Div. 1, scores for each problem will be 500-1000-1500-2000-3000.

In Div. 2, scores for each problem will be 500-1500-1500-2000-2500.

Look! Your high rating is waiting for you! What are you waiting for?

Just participate in this contest and write code fast and nicely, and you will take the high rating home!

Good luck and have fun!

UPD: The contest is over! Congratulations to winners!

Top 5 of Div. 1:

  1. Alex_2oo8

  2. Petr

  3. Dmitry_Egorov

  4. TankEngineer

  5. al13n

Top 5 of Div. 2:

  1. tohdon

  2. KFDong

  3. function348

  4. 104325EA

  5. Boyuede1

Unfortunately, no one has solved the problem E in both divisions. What a sad story....

Editorial for the round will be added soon.

UPD2: Editorial for the round can be found here: Editorial

  • Vote: I like it
  • +557
  • Vote: I do not like it

Comments Comments (189)
| Write comment?
»
10 years ago, # |
← Rev. 3   Vote: I like it +3 Vote: I do not like it

cin >> A long long time ago, there is a child who is our friend.

cout << A long long time ago, there was a child who was our friend.

/* UPD: Thanks for the Round :).

Good luck and have fun all */

→ Reply
  • »
    »
    10 years ago, # ^ |
      Vote: I like it +26 Vote: I do not like it

    It's my fault.I have removed the stupid "a long long time ago". Oh, my poor English……

    → Reply
    • »
      »
      »
      10 years ago, # ^ |
        Vote: I like it +32 Vote: I do not like it

      i am reminded of this comment

      long long ago;	// in a galaxy far far away
      → Reply
    • »
      »
      »
      10 years ago, # ^ |
        Vote: I like it +11 Vote: I do not like it

      You have a good sense of humor. I believe this round will be very wonderful :)

      → Reply
»
10 years ago, # |
  Vote: I like it +17 Vote: I do not like it

So fast announcement of the score distribution!

→ Reply
»
10 years ago, # |
← Rev. 2   Vote: I like it +5 Vote: I do not like it

"Just participate in this contest and write code fast and nicely, and you will take the high rating home!"

→ Reply
»
10 years ago, # |
  Vote: I like it +9 Vote: I do not like it

Happy to see a new template for the round announcement instead of those formal templates with the same sentences (only changing the numbers) used for the last rounds! This round seems special. Everything is new... Wish luck for everyone!

→ Reply
»
10 years ago, # |
  Vote: I like it +3 Vote: I do not like it

quite looking forward to this round.

→ Reply
»
10 years ago, # |
  Vote: I like it +25 Vote: I do not like it

Problem E 3000...I guess it must be very hard

→ Reply
  • »
    »
    10 years ago, # ^ |
      Vote: I like it +9 Vote: I do not like it

    Maybe you're right!~ Maybe not~

    → Reply
  • »
    »
    10 years ago, # ^ |
      Vote: I like it +17 Vote: I do not like it

    What a very clever guess!!! you must be genius!!

    → Reply
    • »
      »
      »
      10 years ago, # ^ |
        Vote: I like it +12 Vote: I do not like it

      I did the same guess! I must be genius!!

      → Reply
  • »
    »
    10 years ago, # ^ |
      Vote: I like it +3 Vote: I do not like it

    Problem E 3000...I guess it must be very hard

    that was an understatement. not even a single Pretests passed!

    → Reply
    • »
      »
      »
      10 years ago, # ^ |
        Vote: I like it +26 Vote: I do not like it

      Why understatement? More like usual Chinese round :D

      → Reply
»
10 years ago, # |
  Vote: I like it +6 Vote: I do not like it

Chinese Div 1 E problems with wealth 3000 are usually very hard. Let's see who will solve it..

→ Reply
»
10 years ago, # |
  Vote: I like it +3 Vote: I do not like it

Is picks a person?

→ Reply
»
10 years ago, # |
  Vote: I like it 0 Vote: I do not like it

What about Russian language?

→ Reply
  • »
    »
    10 years ago, # ^ |
      Vote: I like it +11 Vote: I do not like it

    what about the russian language? nowhere in the blog is it mentioned that the problem statements will be in chinese.

    → Reply
    • »
      »
      »
      10 years ago, # ^ |
        Vote: I like it +1 Vote: I do not like it

      We would like to add Chinese language but it seems to need a big change to the website. Maybe we should advise Mike to add Chinese to codeforces? Lots of Chinese participants will be very happy for that.

      → Reply
      • »
        »
        »
        »
        10 years ago, # ^ |
          Vote: I like it 0 Vote: I do not like it

        Such a request should probably already include one qualified translation of the page :D

        → Reply
        • »
          »
          »
          »
          »
          10 years ago, # ^ |
            Vote: I like it 0 Vote: I do not like it

          Yeah. So i said it needs a big change to the website. Whatever, I'm looking forward to it.

          → Reply
      • »
        »
        »
        »
        10 years ago, # ^ |
          Vote: I like it 0 Vote: I do not like it

        CodeChef now supports both Russian and Mandarin Chinese translations of English problems (MinakoKojima and gediiiiiii are usually the Mandarin translators).
        maybe Chinese language will be added to Codeforces soon. :)

        → Reply
      • »
        »
        »
        »
        6 years ago, # ^ |
          Vote: I like it 0 Vote: I do not like it

        Five years past, We Chinese are able to understand the English, and I like English so much!

        → Reply
»
10 years ago, # |
← Rev. 2   Vote: I like it +16 Vote: I do not like it

Unleash the child coder within

→ Reply
»
10 years ago, # |
  Vote: I like it +3 Vote: I do not like it

Today is my first Children's Day after my 18th birthday. I'm looking forward to having a memorable contest. Thank you very much. Good luck.

→ Reply
»
10 years ago, # |
  Vote: I like it 0 Vote: I do not like it

Wow, a typical Chinese style announcement. LOL

→ Reply
»
10 years ago, # |
  Vote: I like it +4 Vote: I do not like it

I think this announcement is very nice :) It seems it will be a funny round.

→ Reply
»
10 years ago, # |
  Vote: I like it +10 Vote: I do not like it

A contest on my birthday :D Thank you very much. Good luck.

→ Reply
»
10 years ago, # |
  Vote: I like it 0 Vote: I do not like it

No Chinese Discription.....Sad....

→ Reply
»
10 years ago, # |
  Vote: I like it +22 Vote: I do not like it

a 3000 E …… no one can solve Chinese's E until……

→ Reply
»
10 years ago, # |
  Vote: I like it +3 Vote: I do not like it

I hope i do something better this time...All the best to everyone :)

→ Reply
»
10 years ago, # |
  Vote: I like it +11 Vote: I do not like it

Obviously, the problem E is going to be a good surprise :D

→ Reply
»
10 years ago, # |
  Vote: I like it 0 Vote: I do not like it

vfleaking is good at I think problem E can't be solved by Ordinary people 。。

→ Reply
»
10 years ago, # |
  Vote: I like it 0 Vote: I do not like it

i thing it does not connect!

"Happy Children's Day everyone. What should you do to celebrate the special holiday?

Of course, another Codeforces Round is your best choice!"

→ Reply
»
10 years ago, # |
  Vote: I like it 0 Vote: I do not like it

Problem E 3000 again... just can't imagine how hard it can be :p The same as last chinese round

→ Reply
»
10 years ago, # |
  Vote: I like it +7 Vote: I do not like it

My previous contest was good bye 2013. After a long time I registered today again. Then what do I see? Chinese problem setter with 3000 pointer E!! Perhaps I should postpone my first contest of 2014 till "Good Bye 2014" :p

→ Reply
  • »
    »
    10 years ago, # ^ |
      Vote: I like it +17 Vote: I do not like it

    Not like you have to solve E... not like anyone will solve E...

    → Reply
    • »
      »
      »
      10 years ago, # ^ |
        Vote: I like it +8 Vote: I do not like it

      True. I barely passed the pretest for A. Definitely going down today.

      → Reply
      • »
        »
        »
        »
        10 years ago, # ^ |
          Vote: I like it 0 Vote: I do not like it

        me too... going down consecutively for the 4th time :(

        → Reply
»
10 years ago, # |
  Vote: I like it 0 Vote: I do not like it

Can I upvote twice? Or thrice? Please?

→ Reply
»
10 years ago, # |
← Rev. 3   Vote: I like it 0 Vote: I do not like it

I'm probably going to kill the problemsetter if in Div1 250C the 6th pretest (the one almost everyone has failed in their first submission) has multiple copies of the same vertex.

I do really hope that there is another reason for my solution failing it... :D

→ Reply
  • »
    »
    10 years ago, # ^ |
      Vote: I like it 0 Vote: I do not like it

    Come on, that test wasn't so bad... pretests 5 and 9 were equally [sarcasm]user-friendly[/sarcasm]

    I'm guessing more like tricky situations with diagonals inside/outside the polygon with multiple collinear vertices — the standard geometric axe

    → Reply
    • »
      »
      »
      10 years ago, # ^ |
        Vote: I like it 0 Vote: I do not like it

      Oops I gave you -1. [truth] I wanted to give +. Liked that [sarcasm] [/sarcasm] [/truth]

      → Reply
  • »
    »
    10 years ago, # ^ |
      Vote: I like it 0 Vote: I do not like it

    Maybe collinear segments? It took me more than one hour to find this... So bad that I didn't have it in my library ; d.

    → Reply
»
10 years ago, # |
  Vote: I like it +14 Vote: I do not like it

A Google search on mysterious number 998244353 leads to integer FFT, maybe that's a hint to problem E, but I can't got any idea.

→ Reply
  • »
    »
    10 years ago, # ^ |
      Vote: I like it 0 Vote: I do not like it

    That'd be finally one nice modulo that allows it. It's annoying that you can't do FFT with the most common ones, 109 + 7 and 109 + 9...

    → Reply
  • »
    »
    10 years ago, # ^ |
    ← Rev. 6   Vote: I like it 0 Vote: I do not like it

    That's quite possible. Note that if we were to count number of directed paths (let's say, there can be no left children), our answer would be the coefficients of the following polynomial:

    (it's easy to see if you know anything about generating functions). However, at the moment I have no idea how to generalize it to count number of trees... ;)

    → Reply
    • »
      »
      »
      10 years ago, # ^ |
      ← Rev. 2   Vote: I like it 0 Vote: I do not like it

      Okay, so let's define the generating function as follows: there are ci good binary trees of weight i. Then P(x) satisfies

      P(x) = 1 + (xc1 + xc2 + ... + xcn)P(x)2

      Explanation: every tree is either a "dead end" ("empty set"); this is this 'one' in the equation or a vertex having one of the weights: c1, ..., cn and two subtrees (maybe non-existent). Of course, each of the subtrees can be described by the same generating function P(x). That's why we have the second addend.

      However, I have no idea how to compute P(x) fast (even the m lowest coefficients)...

      → Reply
      • »
        »
        »
        »
        10 years ago, # ^ |
          Vote: I like it +8 Vote: I do not like it

        Square root of polynomials is the solutiin. However, to let it easier, we let divide and conquer + FFT pass it, even though the only person who do this got TLE with some reason...

        → Reply
        • »
          »
          »
          »
          »
          10 years ago, # ^ |
            Vote: I like it 0 Vote: I do not like it

          How to calculate the square root of polynomial fast?

          → Reply
    • »
      »
      »
      10 years ago, # ^ |
        Vote: I like it 0 Vote: I do not like it

      In problem E answer is the same row, but with catalanian numbers as a coefficients

      → Reply
»
10 years ago, # |
  Vote: I like it +11 Vote: I do not like it

how to solve Div-1 B?

→ Reply
  • »
    »
    10 years ago, # ^ |
    ← Rev. 3   Vote: I like it +8 Vote: I do not like it

    i used maximum spanning tree and disjoint set.

    cost for each edge between U and V is min(animal[U], animal[v]) .

    → Reply
    • »
      »
      »
      10 years ago, # ^ |
        Vote: I like it 0 Vote: I do not like it

      Then...How to get the answer in this way? I'm afraid I still don't know what to do next.

      → Reply
      • »
        »
        »
        »
        10 years ago, # ^ |
          Vote: I like it +3 Vote: I do not like it

        while you build maximum spanning tree you can calculate the answer. when you add edge U-V the number of ways use this edge is ( number of nodes are reachable nodes from U in spanning tree before adding U-V) * (number of reachable nodes from V in spanning tree before adding U-V) so ans+=(cnt[U]*cnt[V])*Cost[U-V], and then you add U-V to the maximum spanning tree with updating disjoint set (like Kruskal algorithm).

        → Reply
  • »
    »
    10 years ago, # ^ |
      Vote: I like it +6 Vote: I do not like it

    I used a Union-Find approach, where you add the nodes from largest value to smallest value. Then think about what happens when you add a new node — all nodes that are not yet connected must use a node that is at least this low. It then comes down to combining multiple adjacent components of already added nodes, think about this and you will figure it out (it`s simply multiplying the sizes together with the current node value).

    Not sure if this is intendend solution or even passes systest, but it worked on pretests.

    → Reply
»
10 years ago, # |
  Vote: I like it +86 Vote: I do not like it

(•_•) I guess

( •_•)>⌐■-■ in this contest

(⌐■_■) we were troll'D

YEEEEAAAHHH!

Srsly, D... I wonder how many people had the same trololo solution as me: keep an interval tree that allows operation 3 and is able to find the largest number in a given interval along with its position; when performing operation 2, just keep taking out the largest number and moduling it until there are no numbers  ≥ x; sums are then handled by a Fenwick tree.

I have a nice proof of why it works: consider a number a and applying a = an = a%x on it for various x. If such an operation had any effect, then either or the next modulo that has any effect is , or it's . In the second case, , and in the third, . We can see that after 2 modulos do something, a must decrease at least 2 times, which can only repeat times. Therefore, the total number of actions for all operations of type 2 is and with lookup and related updates, plus the cost of processing the other queries, gives total time complexity . WIN!

→ Reply
  • »
    »
    10 years ago, # ^ |
      Vote: I like it +11 Vote: I do not like it

    It's quite right. You can think about how to solve it when operation 3 is segment modify.

    → Reply
    • »
      »
      »
      10 years ago, # ^ |
      ← Rev. 3   Vote: I like it 0 Vote: I do not like it

      i don't know way My Solution got TLE, for operation of type 2 i update an interval if maximum number in this interval is >mod.

      → Reply
      • »
        »
        »
        »
        10 years ago, # ^ |
          Vote: I like it +3 Vote: I do not like it

        Updates all numbers in the interval or just the ones that are actually larger? It's a huge difference in complexity.

        → Reply
        • »
          »
          »
          »
          »
          10 years ago, # ^ |
          ← Rev. 2   Vote: I like it 0 Vote: I do not like it

          it's a segment tree, if int an interval C , node[C].max<=mod then i return other wise i process this interval with calling upd(i*2), upd(i*2+1), i think this should update only bigger number ans skip the other ones.

          → Reply
          • »
            »
            »
            »
            »
            »
            10 years ago, # ^ |
              Vote: I like it +3 Vote: I do not like it

            Sounds like it should work, maybe it's just a problem with constant factors.

            → Reply
            • »
              »
              »
              »
              »
              »
              »
              10 years ago, # ^ |
                Vote: I like it 0 Vote: I do not like it

              maybe, that's disappointing :(

              → Reply
              • »
                »
                »
                »
                »
                »
                »
                »
                10 years ago, # ^ |
                  Vote: I like it 0 Vote: I do not like it

                Looking at your code's times: or maybe an unlucky infinite loop. Or I'm wrong and it's really too slow, maybe by little and there's an evil test. Who knows...

                → Reply
      • »
        »
        »
        »
        10 years ago, # ^ |
          Vote: I like it +3 Vote: I do not like it

        There is bug in function updmod: nd[i].m=x;

        → Reply
  • »
    »
    10 years ago, # ^ |
      Vote: I like it +16 Vote: I do not like it

    Same as your solution, but I used a division into sqrt(N) blocks instead of a segment tree (and for each block I maintained a multiset with the sorted elements, in order to easily update only the needed numbers at each modulo operation). I was very reluctant to implement this and I thought quite a long time about how I could "compose" two modulo operations, but after not finding any way of efficiently composing them, I implemented this just in case :) Still, it could have TLE'ed, because of the sqrt(N) factor (compared to only a log(N) factor in the segment tree solution), but it didn't.

    → Reply
»
10 years ago, # |
  Vote: I like it -7 Vote: I do not like it

I guess it would me more correct to put Div2 C problem worth 1000 points.

→ Reply
»
10 years ago, # |
  Vote: I like it +23 Vote: I do not like it

I am really surprised by the elegant solution for Div 1 A ( min of each end of an edge ). It's like instead of removing the nodes, we were just cutting the ropes.

→ Reply
»
10 years ago, # |
  Vote: I like it +43 Vote: I do not like it

At the start I opened Div1 problems instead of Div2 and thought the problems look much tougher than the usual rounds. So I checked the dashboard and found 230 people had already solved A(Div2 C) so I decidded to manage it somehow and started working on it. I got the idea in a few minutes and thanks to my poor internet connection after reconnecting 2-3 times when I finally tried to submit it showed "You must be registered to submit" error. Only then did realize my mistake and finally solved my first problem C in contest time. :D Earlier I did not even read problems beyond B because I thought they are too hard for me. But after this I think I will atleast read all problems after solving A and B.

→ Reply
  • »
    »
    10 years ago, # ^ |
      Vote: I like it +4 Vote: I do not like it

    Sometimes C is much easier than B!

    → Reply
    • »
      »
      »
      10 years ago, # ^ |
        Vote: I like it +1 Vote: I do not like it

      Yeah this was one of those occasions. I couldn't solve B.

      → Reply
  • »
    »
    10 years ago, # ^ |
      Vote: I like it +17 Vote: I do not like it

    That is a great story, congratulations! Sometimes the biggest obstacle is the belief “This problem must be too hard for me.”

    → Reply
»
10 years ago, # |
  Vote: I like it 0 Vote: I do not like it

Prob C Div2 which is Prob A div 1 is it a greedy or DP problem ?

→ Reply
  • »
    »
    10 years ago, # ^ |
      Vote: I like it 0 Vote: I do not like it

    It's a "don't think hard, think smart" problem. Read the comments above before asking.

    → Reply
  • »
    »
    10 years ago, # ^ |
      Vote: I like it 0 Vote: I do not like it

    As I thought (it might be wrong), we can add to sum minimal cost of line from a to b or from b to a for every line.

    → Reply
  • »
    »
    10 years ago, # ^ |
      Vote: I like it 0 Vote: I do not like it

    Greedy.

    → Reply
    • »
      »
      »
      10 years ago, # ^ |
        Vote: I like it 0 Vote: I do not like it

      do u mean remove the nodes in decreasing order of ? if so, can u give a proof for this?
      i couldn't prove it during contest, so i just checked that it worked for all sample cases (and 2 more of my own), and implemented it!

      → Reply
      • »
        »
        »
        »
        10 years ago, # ^ |
          Vote: I like it +1 Vote: I do not like it

        Yup, remove the vertices in decreasing order of vi. It's obvious that you can do it, and that this way, each edge will be removed exactly once, adding cost vi to the total. Also, when an edge is removed, it adds to the total cost v of one of its endpoints, so this greedy gives the total cost equal to this lower bound.

        → Reply
        • »
          »
          »
          »
          »
          10 years ago, # ^ |
            Vote: I like it 0 Vote: I do not like it

          will, can you please explain this case

          5 4
10 20 20 20 20
1 2
1 3
1 4
1 5
          → Reply
          • »
            »
            »
            »
            »
            »
            10 years ago, # ^ |
              Vote: I like it +27 Vote: I do not like it

            My name isn't Will :D

            We have 4 parts connected to a central one. Removing each of those 4 parts costs us 10, and that's what we get when taking min(v1,vx) for x=2,3,4,5.

            → Reply
            • »
              »
              »
              »
              »
              »
              »
              10 years ago, # ^ |
                Vote: I like it 0 Vote: I do not like it

              I know i meant the word will :3

              thank you for explanation, im convinced now :D

              → Reply
      • »
        »
        »
        »
        10 years ago, # ^ |
        ← Rev. 3   Vote: I like it +13 Vote: I do not like it

        When we remove vertex i, we get a cost from vertex j (namely vj). Assign this cost to the edge ij. Then the total cost required is the sum of costs of all edges.

        Note that each edge is only counted once (when removing one of its endpoints; removing any other vertex doesn't affect this, and removing the second endpoint has no effect as the first endpoint has gone), and its value is the cost of one of its two endpoints. Thus we minimize the total cost by minimizing the costs of all edges, namely by choosing the smaller cost for each edge.

        When we remove the nodes in decreasing order of vi, we always assign the smaller cost to each edge. Suppose for edge ij, we assign the value vj, but vi < vj. Then we should have removed vertex j first and assigned the value vi to the edge, contradiction. Thus we have assigned the smaller cost to every edge, and thus we have obtained the smallest total cost.

        → Reply
        • »
          »
          »
          »
          »
          10 years ago, # ^ |
            Vote: I like it +3 Vote: I do not like it

          Nice explanation. I also couldn't proof it during contest.

          → Reply
        • »
          »
          »
          »
          »
          10 years ago, # ^ |
            Vote: I like it +8 Vote: I do not like it

          nice proof. thanks a lot! :)

          → Reply
        • »
          »
          »
          »
          »
          10 years ago, # ^ |
            Vote: I like it 0 Vote: I do not like it

          I tried to find the i-th node having the minimum sum of energy of its connected j-nodes and removed the i-th node iteratively. I was wrong hoping that greedy approach would work here :( I did not think that removing minimum sum cost of connected node can have its own energy values too high and thus increasing the total cost. Still I understood my mistake and i hope i don't commit this mistake again

          → Reply
          • »
            »
            »
            »
            »
            »
            10 years ago, # ^ |
              Vote: I like it 0 Vote: I do not like it

            The solution is actually greedy, but in a different greedy way (take the vertex with the largest cost every time).

            Your solution fails for the following:

            3 2
3 2 2
1 2
1 3

            A vertex with cost 3 is connected to two vertices with cost 2.

            Your solution dictates that as both of the cost-2 vertices have lower minimum sum of costs (namely 3) as opposed to the cost-3 one (namely 2 + 2 = 4), you remove one of them first. This way you get an answer of 5, while the optimal solution is 4 (remove the cost-3 vertex first).

            → Reply
»
10 years ago, # |
  Vote: I like it +4 Vote: I do not like it

Hi setters, I really like at least those problems I had a chance to read — A, B, C, D in DIV2, thanks ;-)

→ Reply
»
10 years ago, # |
  Vote: I like it 0 Vote: I do not like it

Any hint for task D div2?

→ Reply
  • »
    »
    10 years ago, # ^ |
    ← Rev. 2   Vote: I like it 0 Vote: I do not like it

    DSU. Kruskal's algorithm.

    → Reply
    • »
      »
      »
      10 years ago, # ^ |
      ← Rev. 2   Vote: I like it 0 Vote: I do not like it

      It's not the Kruskal algorithm in fact. It just uses disjoint set union.

      → Reply
      • »
        »
        »
        »
        10 years ago, # ^ |
          Vote: I like it 0 Vote: I do not like it

        Mmm, in my solution in the end I have maximum spanning tree so I think it can be called Kruskal algorithm.

        → Reply
        • »
          »
          »
          »
          »
          10 years ago, # ^ |
            Vote: I like it 0 Vote: I do not like it

          Well, I'm sorry then. In my solution I do not use Kruskal's algorithm at all.

          → Reply
          • »
            »
            »
            »
            »
            »
            10 years ago, # ^ |
              Vote: I like it +6 Vote: I do not like it

            Oh, no problem. I think ideas of all solutions are the same and having Kruskal or not is just question of implementation.

            → Reply
»
10 years ago, # |
← Rev. 3   Vote: I like it +6 Vote: I do not like it

At first, I didn't know how to solve A and got WA twice. Then, I checked Status and noticed that the memory usage of those who passed pretests was too low. I realized that I didn't have to make an adjacency matrix XD

→ Reply
»
10 years ago, # |
← Rev. 2   Vote: I like it 0 Vote: I do not like it

Nice round. It seems that the ones who predicted there won't be any accepted solution to E where right. I want to ask what are some good materials on FFT (because Wikipedia gives a lot of probably interesting stuff, but they seem too mathy to apply in any programming contest task). Thanks in advance.

→ Reply
»
10 years ago, # |
  Vote: I like it +5 Vote: I do not like it

hacking at DIV2 was like hell :D pretty contest,thanks vfleaking

→ Reply
  • »
    »
    10 years ago, # ^ |
      Vote: I like it 0 Vote: I do not like it

    i only wish Div-1 also had more hacking opportunities!
    other than that, it was a great round! keep it up vfleaking! :)

    → Reply
»
10 years ago, # |
← Rev. 2   Vote: I like it -16 Vote: I do not like it

I think that the test cases for Div1D are weak because many users get accepted solutions using O(NlogN) for operations type 2. For example Petr solution: 6770456

→ Reply
  • »
    »
    10 years ago, # ^ |
      Vote: I like it 0 Vote: I do not like it

    It's in average, because each number X can be decreased with operation Mod only times.

    → Reply
  • »
    »
    10 years ago, # ^ |
      Vote: I like it +5 Vote: I do not like it

    I explain it here

    → Reply
    • »
      »
      »
      10 years ago, # ^ |
        Vote: I like it -8 Vote: I do not like it

      consider this test case

      N = M = 10^5

      all elements a[i]=10^9

      all querys of type 2

      1st — [1 N] x=10^9 — 1

      2st — [1 N] x=10^9 — 2

      3st — [1 N] x=10^9 — 3

      ..

      what is the complexity for this test case?

      → Reply
      • »
        »
        »
        »
        10 years ago, # ^ |
        ← Rev. 3   Vote: I like it +21 Vote: I do not like it

        LOL, after the first query all numbers will become 1's, so other ones will be processed in O(1) time.

        → Reply
  • »
    »
    10 years ago, # ^ |
      Vote: I like it 0 Vote: I do not like it

    the time limit is 4 secs. And it is not O(nlogn) for operations type 2. When the maximum of an interval is smaller than the mod number, this interval can be skipped, because x%m=x, when x<m. Then if x>=m,we can get x%m<m, so the number decrease very fast.

    → Reply
  • »
    »
    10 years ago, # ^ |
    ← Rev. 2   Vote: I like it 0 Vote: I do not like it

    That's because a number won't be done modulo operation efficaciously too many times.

    → Reply
  • »
    »
    10 years ago, # ^ |
      Vote: I like it 0 Vote: I do not like it

    Solution of 1D works in O(MlogNlogMAX) , we can use potential method to prove it. Let's assign the potential of number P be logP, then if that number is changed by operation 2 its potential decreases at least 1. And then build an interval tree which supports dynamic RMQ problem, and while working on operation type 2 first check if the maximum element in range(l,r) >= M, then process it on that number, until such number doesn't exist in asked range.

    We can see that:

    Initially: the potential of the sequence <= NlogMAX

    Operation 1: costs O(logN) time, and potential doesn't change. Amortized complexity = O(logN).

    Operation 3: costs O(logN) time, and potential increases at most logMAX, as we need O(logN) time to clear 1 unit of potential, amortized complexity is O(logN + logNlogMAX).

    Operation 2: We need O(logN) time to check the maximum <= M, and because the time to clear potential is included in operation 3, this is not counted in total time.

    Summing up all these cases gives us O(MlogNlogMAX) total time complexity

    → Reply
»
10 years ago, # |
  Vote: I like it -17 Vote: I do not like it

Мне неясно почему в задаче A DIV.2 в 28 тесте ответ С, а не A?

→ Reply
  • »
    »
    10 years ago, # ^ |
    ← Rev. 2   Vote: I like it -23 Vote: I do not like it

    Два хороших ответа: A и D. Значит, мальчик выберет ответ C

    1 по крайней мере в 2 раза меньше и 2, и 4, и 8

    А 8 по крайней мере в 2 раза больше и 1, и 2, и 4

    → Reply
    • »
      »
      »
      10 years ago, # ^ |
        Vote: I like it -7 Vote: I do not like it

      could both write in english for everyone understand? or translate in google like me

      → Reply
      • »
        »
        »
        »
        10 years ago, # ^ |
          Vote: I like it +3 Vote: I do not like it

        It's because hball1st forgot to check Russian language when writing the comment.

        hball1st: Why in Div2 A "C" is answer to 28-th test, but not "A"?

        me: Two good answers A and D. So, boy will choose answer C

        1 is at least 2 times less than 2, 4, 8

        And 8 is at least 2 times greater than 1, 2, 4

        → Reply
      • »
        »
        »
        »
        10 years ago, # ^ |
          Vote: I like it 0 Vote: I do not like it

        Google translation is convenient...but the result may be strange for understand....

        → Reply
  • »
    »
    10 years ago, # ^ |
    ← Rev. 2   Vote: I like it -8 Vote: I do not like it

    Потому что D длиннее всех остальных вариантов как минимум в два раза, а значит у нас есть два хороших варианта, в таком случае мы должны выбрать С. upd: не заметил ответ выше :)

    → Reply
  • »
    »
    10 years ago, # ^ |
      Vote: I like it 0 Vote: I do not like it

    answer D and A satisfy the conditions

    in this case you should print C

    → Reply
»
10 years ago, # |
  Vote: I like it +6 Vote: I do not like it

BOOOOOOOP!

I just found out what my WA in div1 B was about. I forgot to add 1LL* once...

→ Reply
  • »
    »
    10 years ago, # ^ |
      Vote: I like it 0 Vote: I do not like it

    Perhaps you won't forget it any more~ XD~

    → Reply
    • »
      »
      »
      10 years ago, # ^ |
      ← Rev. 2   Vote: I like it 0 Vote: I do not like it

      I doubt it. It isn't really forgetting, just that I don't write it even if I realize that it should be there, and don't notice it. I don't really have time to check my code line by line and compare it with my idea of the algorithm.

      → Reply
      • »
        »
        »
        »
        10 years ago, # ^ |
          Vote: I like it 0 Vote: I do not like it

        when it comes to this kind of problem, especially in the problem there is a sentence like "please use 64-bit....." I always declare all the variable as long long.....

        → Reply
        • »
          »
          »
          »
          »
          10 years ago, # ^ |
            Vote: I like it 0 Vote: I do not like it

          It can still fail. Suppose that you're actually multiplying vector/string sizes — you'd still need to cast them, and if you're used to thinking "if I declare all as long long, then it's fine", you can fail in that case.

          Everything can fail, especially if you just unexplainably don't write something.

          → Reply
»
10 years ago, # |
  Vote: I like it +8 Vote: I do not like it

I finish my div1D code at 1:59:59, and submit it...then unfortunately,out of time,just a second.... then after system test....I submit it again, accepted.what a sad story...

→ Reply
»
10 years ago, # |
  Vote: I like it 0 Vote: I do not like it

Problem Div1 C is similar to this problem Ears Cutting

→ Reply
»
10 years ago, # |
  Vote: I like it 0 Vote: I do not like it

I used a DP solution for DIV2 B to collect the sum which gave TLE at system test

and i thought of DIV2 C as a graph problem

I wasn't pretty sure about disconnecting the node which has a minimum-cost neighbors, maximum neighbors or the node which has maximum cost and none of them gave me optimal solution.

i'm going really down today but Great contest!.

Lesson learned, Never overestimate the problem!

→ Reply
  • »
    »
    10 years ago, # ^ |
      Vote: I like it 0 Vote: I do not like it

    Honestly speaking, I solved DIV2 C using greedy algorithm, which was really out of my expectation.

    → Reply
    • »
      »
      »
      10 years ago, # ^ |
        Vote: I like it 0 Vote: I do not like it

      yes. i thought of every possible way to solve this problem except the greedy way! :D

      → Reply
  • »
    »
    10 years ago, # ^ |
      Vote: I like it 0 Vote: I do not like it

    How is your dp then? Actually using dp and simple backtrack can run in linear time, should be fast enough

    → Reply
    • »
      »
      »
      10 years ago, # ^ |
        Vote: I like it 0 Vote: I do not like it

      Hi icalFikr, could you please explain the dp method? Thanks

      → Reply
      • »
        »
        »
        »
        10 years ago, # ^ |
        ← Rev. 3   Vote: I like it 0 Vote: I do not like it

        I'm not pretty sure if its called DP or else

        Suppose we have range [0..X], we can make every number from 0 to X with lowbit of some elements from set S.

        If we add one more element from S, supposed to be M. We can update range become [0 .. X + lowbit(M)], the proof is really easy. So, range [X + 1 .. X + lowbit(M)] can be arranged by M as last component.

        After we precalc last component for each X <= sum, we can backtrack the query and find all of components of sum.

        Sorry for my bad english ^^

        Here is my solution if you want to know more

        → Reply
»
10 years ago, # |
  Vote: I like it +5 Vote: I do not like it

please update the ratings soon

→ Reply
»
10 years ago, # |
  Vote: I like it +1 Vote: I do not like it

Very nice contest in this special day. Problems was very interesnting to solve, and the div 2 A problem was like a bomb for hacking. I want more contest from you vfleaking

→ Reply
»
10 years ago, # |
← Rev. 3   Vote: I like it 0 Vote: I do not like it

подскажите почему в задаче А вот такой тест дает ответ А

сам тест

A.aaaa

B.aa

C.a

D.a

→ Reply
  • »
    »
    10 years ago, # ^ |
      Vote: I like it 0 Vote: I do not like it

    "Why the answer is A and not C?" -- Google Translate

    C and D aren't great, because the 1-character C is not twice shorter than the 1-character D. However, if we modify the case:

    A.aaaa
B.aa
C.aa
D.a

    Then yes, A and D are both great, and so the answer is C.

    → Reply
»
10 years ago, # |
  Vote: I like it 0 Vote: I do not like it

What is the complexity of optimal solution for Div2B?

→ Reply
»
10 years ago, # |
  Vote: I like it 0 Vote: I do not like it

why have you added test case on div 2 B problem after the contest

→ Reply
»
10 years ago, # |
  Vote: I like it 0 Vote: I do not like it

the sad thing is that the only one who submit E problem got WR in testcase 15 :(

→ Reply
»
10 years ago, # |
  Vote: I like it 0 Vote: I do not like it

im not convinced with the solution of problem C Div2 does any one has any proof for it ??

→ Reply
»
10 years ago, # |
← Rev. 2   Vote: I like it +2 Vote: I do not like it

my rating was not changed :D

→ Reply
»
10 years ago, # |
  Vote: I like it +22 Vote: I do not like it

Round Stats

→ Reply
»
10 years ago, # |
  Vote: I like it 0 Vote: I do not like it

Wow, kids from China. such a great round!

→ Reply